11 SERVICE WORK ON THE CHASSIS
11.13
11.14
11.15
52
Take off the side cover
S03283-10
Mounting side cover
S03288-10
Removing the front fender
Preparatory work
–
Open the fuel tank filler cap. (
–
Remove the seat. (
p. 50)
Main work
–
Remove the left side cover from the rubber bushing in area
A
.
–
Remove the left side cover upwards from the bushing in area
B
.
–
Take off the left side cover from the front.
–
Repeat these steps on the opposite side.
Main work
–
Position the left side cover using holding lugs
2
and push towards the rear and, in the rear section, down-
ward.
–
Press the left side cover into the rubber bushing
A
.
–
Repeat these steps on the opposite side.
Finishing work
–
Mount the seat. (
p. 50)
Preparatory work
–
Remove the headlight mask with the headlight. (
p. 19)
1
on bushings
3
in area
p. 89)