KTM 690 SMC R EU 2021 Owner's Manual page 96

15 COOLING SYSTEM
94
–
Remove radiator cap
–
Completely drain the coolant.
S03318-11
–
Mount and tighten screw
Guideline
Screw plug, water
pump drain hole
K00402-10
–
Stand the motorcycle on a level surface using the side stand.
–
Refill with coolant.
Coolant
–
Completely fill the radiator with coolant.
–
Mount radiator cap
S03318-11
–
Remove cover
–
Add coolant to the top marking.
–
Mount the cover of the compensating tank.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
S03316-12 when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and allow it to warm up.
–
Stop the engine and allow it to cool down.
Finishing work
–
Check the coolant level. (
2
.
1
with a new seal ring.
M10x1 15 Nm (11.1 lbf ft)
1.20 l Coolant (
(1.27 qt.)
2
.
3
of the compensating tank.
p. 90)
p. 118)