Adjusting Chain Guide; Adjusting The Basic Position Of The Clutch Lever; Checking/Correcting The Fluid Level Of Hydraulic Clutch - KTM 690 SMC R EU 2021 Owner's Manual

Table of Contents

Advertisement

11.26

Adjusting chain guide

11.27

Adjusting the basic position of the clutch lever

11.28

Checking/correcting the fluid level of hydraulic clutch

Warning
Skin irritation Brake fluid causes skin irritation.
Keep brake fluid out of the reach of children.
Wear suitable protective clothing and safety glasses.
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
Consult a doctor immediately if brake fluid has been swallowed.
Rinse the affected area with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
If brake fluid spills on to your clothing, change the clothing.
Remove screws
Condition
Number of teeth: ≤ 44 teeth
Insert nut
Mount and tighten screws
Guideline
Screw, chain guide
Condition
Number of teeth: ≥ 45 teeth
Insert nut
Mount and tighten screws
Guideline
Screw, chain guide
S00080-10
Adjust basic position of the clutch lever to your hand size by
turning adjusting screw
Info
Do not make any adjustments while riding.
Push the clutch lever forward and turn the adjusting wheel.
The range of adjustment is limited.
Only turn the adjusting screw by hand, and do not use
force.
102009-10
When adjusting the clutch lever, make sure to leave a mini-
mum clearance to other parts of the vehicle.
Guideline
Minimum clearance
SERVICE WORK ON THE CHASSIS 11
1
2
and
. Take off the chain guide.
3
A
in hole
. Position the chain guide.
1
2
and
.
M6
3
B
in hole
. Position the chain guide.
1
2
and
.
M6
1
.
5 mm (0.2 in)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

690 smc r 2021F9703u9

Table of Contents