Setting The Service Interval; Distance 1 - KTM 690 SMC R EU 2021 Owner's Manual

6 CONTROLS
6.20.6
6.20.7
22
S04363-01
S04367-01

Setting the service interval

S04375-01

Distance 1

S04369-01
– Press the + or ‑ button until the indicator CLK appears in the
combination instrument.
– Press and hold the ‑ button for 3-5 seconds.
The combination instrument switches to the clock setting
mode.
– Press the ‑ button to select the 24 h display or 12 h display
for the clock.
–
Confirm the selection using the + button.
The setting is adopted and the combination instrument
changes to the next menu item.
– Press the ‑ button to set the hour.
–
Confirm the selection using the + button.
The setting is adopted and the combination instrument
changes to the next menu item.
– Press the ‑ button to set the minute.
–
Confirm the selection using the + button.
The setting is adopted and the setting mode is closed.
Condition
The motorcycle is stationary.
– Press the + or ‑ button repeatedly until SER is shown on the
combination instrument.
– Press the ‑ button repeatedly until the service interval display
starts flashing.
– Press the ‑ button repeatedly until the desired service interval
is displayed.
Info
The indicator can be set within the range of 500 to
10,000.
– Press and hold the ‑ button for 3–5 seconds until the indicator
is no longer flashing.
– Press the + or ‑ button repeatedly until TR1 is shown on the
combination instrument.
TR1 shows the distance 1 since the last reset, such as between
two refueling stops.
Info
If the value of 9999.9 is exceeded, TR1 is automatically
reset to 0.0.
Briefly press Next display mode
the button .