Changing The Main Fuse - KTM 690 SMC R EU 2021 Owner's Manual

Table of Contents

Advertisement

14.4

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
Only use fuses with the required ampere value.
Do not bypass or repair fuses.
Info
The main fuse protects all electrical power consumers of the vehicle. It is in the housing of the starter
relay next to the 12-V battery.
Preparatory work
Open the fuel tank filler cap. (
Remove the seat. (
Main work
Pull engine electronics control unit
it to the side.
Take off protection caps
S04579-10
Remove a defective main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse
Insert a new main fuse.
Fuse (58011109130) (
Info
Insert a new spare fuse into the starter relay to have it
available when needed.
Check that the electrical system is functioning properly.
Mount the protection caps.
Position the EFI control unit.
S04580-10
Finishing work
Mount the seat. (
Set the clock. (
ELECTRICAL SYSTEM 14
p. 19)
p. 49)
1
off the holder and hang
2
.
3
with needle nose pliers.
4
is located in the starter relay.
p. 112)
p. 50)
p. 21)
A
.
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

690 smc r 2021F9703u9

Table of Contents