Viewing The Library Configuration - Quantum Scalar i500 User Manual

Viewing the Library Configuration

Scalar i500 User's Guide
• location coordinates, vendor name, model, type,
Tape drives —
physical serial number (P-SN), logical serial number (L-SN),
firmware level, sled boot version, sled application version,
encryption method, and whether the tape drive is connected to an
I/O blade.
• — if the library contains FC I/O blades, this table lists the
I/O blades
location coordinates, worldwide node name (WWN), firmware level,
and ready status.
The path to open the report from the web client is
.
Information
The
Library Configuration
physical locations of various library resources, including tape drives,
slots, partitions, and modules. Use the report to view information on the
following resources. Click on the item you want to view and the
information appears in a box to the right of the library diagram.
• — (depending on the interface type, the information
Tape drives
provided may not include all of the following): interface type, tape
drive type, ready state, online status, assigned partition name,
location coordinates, element address, vendor, model, physical SN,
logical SN, world wide node name (WWNN), world wide port name
(WWPN), loop ID, topology request, speed request, actual topology,
actual speed, maximum speed, SCSI ID, SAS address, tape drive
firmware level, control path status, and encryption method of each
tape drive.
• — type, assigned partition name (storage and import/export
Slots
[I/E] station slots only), location coordinates, barcode (storage and
I/E station slots only), media type, element address, encryption
method, get count, get retries, put count, put retries, and cleaning
status (cleaning slot only) of each slot. For more details about slot
data, see Viewing Slot Information
Chapter 5 Getting Information
Viewing the Library Configuration
report is a dynamic representation of the
on page 151.
Reports > System
149