Exporting Media - Quantum Scalar i500 User Manual

Exporting Media

Scalar i500 User's Guide
You need to provide the following information in the user interface to
move media:
• — Lists the partitions that you have permission to access.
Partition
•
Selected Media
•
Selected Destination
cartridge.
You can filter the list of media by entering all or part of a
Note:
barcode in the
with wildcards. You can also sort the list by clicking on
columns with bold headings. For example, selecting the
Location
• The paths to open the appropriate screens are as follows:
• From the web client, select
• From the operator panel, select
For step-by-step procedures, see the library's online Help. To access the
online Help system, click the
operator panel user interface.
The Export Media operation enables you to export data cartridges from
4
storage slots to empty I/E station slots for removal from the library.
If your library has zero I/E station slots, you cannot import or
Note:
export media. See
This topic focuses on using the library user interface, not the host
application, to export media. Using the library to export media may
necessitate performing an inventory of the library with the host
application. Also, if the host application has issued a prevent media
removal command, you will not be able to use the library user interface to
export media. See your host application documentation for more
information.
If you have AutoClean enabled, you can also export cleaning cartridges.
For information, see
— The single cartridge that you want to move.
— The location to which you want to move the
text box. Use an asterisk (*) to search
Search
column heading sorts the list by location coordinates.
Operations > Media > Move
Operations > Move Media
icon at the top right of the web client or
Help
Configuring I/E Station Slots
Exporting Cleaning Media on page
Chapter 4 Running Your Library
Performing Media Operations
.
.
on page 73.
140.
132