Deleting Advanced Reporting Data; Saving And E-Mailing Advanced Reporting Data; Figure 14 Report Data Buttons - Quantum Scalar i500 User Manual

Deleting Advanced
Reporting Data

Figure 14 Report Data Buttons

Saving and E-mailing
Advanced Reporting Data
Scalar i500 User's Guide
You can see how many records were loaded from the log files for this
report by looking at the Report Data section of the report configuration
page. A note says "XX records read," where XX is the number of records
(see Figure 14).
In some circumstances, you may wish to delete the information contained
5 in the log files used to build the advanced reports. To do this, click the
button in the Report Data section of either report configuration
Delete
page. This deletes the data for both the Drive Resource Utilization report
and the Media Integrity Analysis report.
Once you delete the data in the log files, you cannot get it
Caution:
back. The
is recommended that you save all the data for both the
Drive Resource Utilization report and the Media Integrity
Analysis report before deleting the data (see
mailing Advanced Reporting
You cannot save the report as it appears on the screen, but you can save
or e-mail the report data as a comma-separated values (.csv) file. You can
5
then import the .csv data into a spreadsheet program and manipulate it to
create your own reports for analysis. The .csv file contains all of the data
in the log file that falls within the date range you specify.
1 Generate a report.
2 Scroll down to the bottom of the report viewing screen to a box titled
Retrieve the Report Data File
3 To save the report data as a .csv file, click
button does NOT retrieve deleted data! It
Reload
Data).
.
Chapter 5 Getting Information
Using Advanced Reporting
Saving and E-
.
Save
160