Quantum Scalar i500 User Manual page 261

Scalar i500 User's Guide
Permanently Removing Expansion Modules From an Existing Library
1 Parking tab in "unparked" position
7 Close the library's I/E station and access doors.
8 Connect all power cords, network data cables, and module-to-
module cables. Make sure the module terminators are installed at the
top and bottom of the stack of modules. For cabling instructions, see
Cabling the Library
9 Power on the library.
10 Add the tape cartridges to the library's modules using the I/E station
commands from the operator panel or web client.
Chapter 7 Installing, Removing, and Replacing
on page 172.
246