Quantum Scalar i500 User Manual page 315

Chapter 7 Installing, Removing, and Replacing
Installing the Library in a Rack
8 Install the right rack ear. At the front of the library:
a Open the I/E station door. At the lower right corner of the
module is a vertical slot. Insert the hinge of the right rack ear into
the slot and then position the holes of the rack ear flush with the
rack rail.
1 Hinge of rack ears
b Using two M5 thumbscrews, fasten the rack ear to the rack. The
thumbscrews should thread through the nut clips (or cage nuts)
and fasten completely and evenly.
Scalar i500 User's Guide 300