Unpacking the Library
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
To unpack the library:
Cut the two steel bands that secure the library and packing
1
material to the pallet (see
Use care when cutting the steel bands that secure
Warning:
the library to the pallet. These bands are under
tension and will snap away when cut.
Lift the cardboard box top cover straight up and off the pallet.
2
From the rear side of the container, pull the four cardboard box
3
retaining clips to their open position, and unwrap the
cardboard box from the library (see
Chapter 2 Unpacking and Moving the Library
figure
6).
figure
6).
Unpacking the Library
2
13