Table of Contents
Advertisement
Chapter 2 Unpacking and Moving the Library
Packaging the Library for Reshipment
22
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
Roll the library onto the pallet and into the shipping bag.
11
Seal the shipping bag by folding the seam over and taping the
12
edge.
Install the stop block in front of library front casters (see
13
7
on page 15).
Install the foam cap on the library and install accessory tray.
14
Wrap the box around the library and pallet and install the four
15
plastic retaining clips (refer to
It is recommended that the steel bands be
Caution:
tightened to approximately 200 lb. of tension
prior to shipment.
Install steel banding to secure the library and packing material
16
to the pallet.
figure 6
on page 14).
figure
Advertisement
Table of Contents
