Panasonic WJ-SX550B Operating Instructions Manual page 96

System 500 matrix switcher
Hide thumbs Also See for WJ-SX550B:
Table of Contents

Advertisement

4. Press the IRIS CLOSE/OPEN buttons to close/open the
lens iris. Adjust the lens iris by using these buttons to
obtain the proper picture exposure.
Pressing these buttons at the same time for three sec-
onds or more will reset the lens iris to the factory
default setting.
Note: When a camera, with an ALC Lens, has AGC
turned on, the iris close, open function will operate
more slowly. By pressing the above buttons
repeatedly (instead of holding down), this function
will operate faster.
5. If Lens Control needs fine adjustment, follow the proce-
dures shown below.
1) Select the desired monitor and camera.
2) Select the P/T Z/F Iris (B3) Menu on the LCD dis-
play by pressing the Direction buttons.
B3
P/T Z/F Iris
Step
F1
3) Pressing the Focus, Zoom or Iris control while
holding down the Function (F1) button will adjust
the focus, zoom or lens iris step by step.
Note: Holding down the STOP/SLOW button and
pressing the Focus, Zoom or Iris control, while the
ALT indicator is on, will adjust the focus, zoom or
lens iris step by step without displaying the P/T Z/F
Iris Menu.
98
IRIS
CLOSE OPEN
Pan/Tilt Control (Manual Operation)
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection on
page 96.
2. Move the Joystick Controller to move the Pan/Tilt Head
in the desired direction.
If the joystick is positioned in between UP and RIGHT,
the Pan/Tilt Head moves diagonally upward and to the
right.
Eight directions are available: Up/Down/Right/Left/Up-
Right/Up-Left/Down-Right/Down-Left.
UP
LEFT
DOWN
Note: Moving the Joystick Controller while holding
down the STOP/SLOW button will move the
Pan/Tilt Head at lower speed.
3. If the Pan/Tilt Control needs fine adjustment, follow the
procedures shown below.
1) Select the desired monitor and camera.
2) Select the P/T Z/F Iris (B3) Menu on the LCD dis-
play by pressing the Direction buttons.
B3
P/T Z/F Iris
Step
F1
3) Moving the Joystick Controller while holding down
the Function (F1) button will move the Pan/Tilt
Head step by step.
Note: Holding down the STOP/SLOW button and mov-
ing the Joystick Controller, while the ALT indicator
is on, will move the Pan/Tilt Head step by step with-
out displaying the P/T Z/F Iris Menu.
RIGHT
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-cu550b

Table of Contents