1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Matrix Switcher
  5. WJSX150 - SWITCHER - ADDENDUM
  6. Operating instructions manual

Panasonic WJ-SX150 Operating Instructions Manual

Panasonic wj-sx150 matrix switcher: user guide
Hide thumbs Also See for WJ-SX150:
Table of Contents

Advertisement

Quick Links

O PE RA
TE
OP ER AT
E LE D W
IF CO OL
ILL BL IN
IN G FA N
K
MA LF UN
CT IO NS
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.

Matrix Switcher

Operating Instructions
WJ-SX150
Model No.
1 5 0
M a tr ix S
w itc h e r
W J- S X

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WJ-SX150

Summary of Contents for Panasonic WJ-SX150

  • Page 1: Matrix Switcher

    Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Matrix Switcher Operating Instructions WJ-SX150 Model No. 1 5 0 M a tr ix S w itc h e r...
  • Page 2 You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. WJ-SX150 Serial No. For U.S.A...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Page 4: Table Of Contents

    OPERATOR REGISTRATION ... 62 MULTIPLEXER ... 62 MUX CAMERA TITLE ... 63 WJ-SX150 ADMINISTRATOR CONSOLE ... 64 Description of WJ-SX150 Administrator Console . 64 Installation/Uninstallation ... 64 The Main Window ... 65 Recorder ... 66 Put a File to SX150 ... 67 Get a Configuration Data from SX150 ...
  • Page 5 WJ-HD100 SERIES CONTROL (TERMINAL MODE) ...120 Displaying WJ-HD100 Series SETUP MENU ...120 Controlling Digital Disk Recorder WJ-HD100 Series ...120 TIME-LAPSE VCR CONTROL [PANASONIC MODELS] (TERMINAL MODE) ...122 Controlling the Time-lapse VCR ...122 TIME-LAPSE VCR CONTROL [NON-PANASONIC MODELS] (TERMINAL MODE) ..123 Controlling the Time-lapse VCR ...123 WJ-HD500 SERIES CONTROL (PS·DATA) ...124...

  • Page 6: Preface

    PREFACE Matrix Switcher WJ-SX150 is designed for a surveillance control system, which is composed of 16 cameras, 4 monitors and 4 system controllers. System controllers are used to operate the surveillance control system. In combination with Digital Disk Recorder WJ-HD500 Series, *WJ-HD100 Series or a time-lapse VCR, a surveillance system can be established in a local area.

  • Page 7: Precautions

    Unit: Panasonic Matrix Switcher WJ-SX150 System controller: Panasonic System Controller WV-CU360C or WV-CU360CJ Recorder: Panasonic Digital Disk Recorder WJ-HD500 Series, WJ-HD100 Series* or a time-lapse VCR* (*Available only when the multiplexer board is installed). Receiver: Panasonic Indoor Receiver WV-RC100 or Outdoor Receiver WV-RC150...

  • Page 8: Features Of The Matrix Switcher System

    FEATURES OF THE MATRIX SWITCHER SYSTEM...

  • Page 9: Matrix Switcher System Descriptions

    MATRIX SWITCHER SYSTEM DESCRIPTIONS Matrix Switcher System WJ-SX150 is a surveillance control system, which is composed of cameras, recorders, and this unit (the matrix switcher). This system has various functions for surveillance control. The following are the descriptions about the functions.

  • Page 10: System Control

    DATA 4 port supports both the terminal mode and Panasonic Security Data (PS·Data) Systems. These are the operation mode of the matrix switcher. When using the DATA 4 port, you can employ either of them. Refer to p. 14 for details of the terminal mode.

  • Page 11: Example Of A System With Basic Functions

    The illustration in the next page shows the surveillance system in a parking lot as an example. Before the connections, the matrix switcher's system configuration* and the recorder's alarm recording setting are necessary. Example: Operations of cameras and other connected equipment during an alarm input 1.
  • Page 12 Dwell time : 3 s Dwell time : 2 s Alarm recording mode Camera 1 Preset position 1 Sensor Alarm 3 Matrix Switcher WJ-SX Gate Lamp opens. lights up. (Aux 1) (Aux 2) Camera 5 Dwell time : 30 s...

  • Page 13: Terminal Mode Descriptions

    When operating the system, the operator registration is nec- essary. Up to 16 operators can be registered and filed by their oper- ator IDs. They are registered in WJ-SX150 Administrator Console. The following are the properties, which can prevent the oper- • Description of Operator Registration Operator 1...

  • Page 14: Monitor-Related Functions

    ALM SUSPENDED (The alarm is suspended.) STILL* (Still spot** or still multiscreen display is activat- ed.) * ”STILL” appears when a Multiplexer board is installed inside the matrix switcher. **Available only during playback Clock Note: When pressing the associated numeric button (1 to 5) while holding down the OSD button, information is turned on or off.

  • Page 15: Camera-Related Functions

    Up to 4 tour sequences can be registered in a group. Notes: • Up to 4 group sequences are configurable in WJ-SX150 Administrator Console. The configuration in the matrix switcher's SETUP MENU is unavailable.

  • Page 16: Alarm-Related Functions

    */? Notes: • Camera title is configurable in SETUP MENU and WJ- SX150 Administrator Console. • User font characters can be made through WJ-SX150 Administrator Console. Camera Cleaning When using a combination camera, noise can occur on the monitor after the long-term use.

  • Page 17: Timer Event

    Alarm Reset The built-in timer automatically resets the alarm operation after the time specified in WJ-SX150 Administrator Console. After the reset, the monitor displays and the sequence will return to the state before the alarm input. Note: When more than one alarm input has been accepted, only the newest can be reset.

  • Page 18: System Status Table

    • WJ-SX150 Administrator Console with the PC The setup utility can configure all the functions of the unit. Refer to p. 52 WJ-SX150 SETUP MENU (OSD) and p. 64 WJ-SX150 ADMINISTRATOR CONSOLE for details. Extended Functions If a recorder is connected to the matrix switcher, the follow- ing will be available.
  • Page 19 Multiplexer Board Function To use WJ-HD 100 Series or a time-lapse VCR as a recorder, you need to install a multiplexer board inside the matrix switcher. With the multiplexer board installation, the following will be available. • Multiscreen display More than one camera images can be displayed in 4, 9, and 16 multiscreens.
  • Page 20 Notes: • The motion detector area needs to be configured in SETUP MENU in advance. • The range of the motion detector is also configurable in the WJ-SX150 Administrator Console. Digital Disk Recorder WJ-HD100 Series/Time-lapse VCR The multiplexed recording and playback of all the camera images connected to the unit are possible.

  • Page 21: Notification About Ps·data Controller Operation

    NOTIFICATION ABOUT PS·DATA CONTROLLER OPERATION In the factory default setting, you can control the unit, if you connect a PS·Data system controller to the DATA 4 port. For exam- ple, if you connect a PS·Data unit supporting network connections (refer to p. 43), remote-control of the unit and the PS·Data units will be available with a system controller or PC.

  • Page 22: Detailed Product Description

    DETAILED PRODUCT DESCRIPTION...

  • Page 23: Major Operating Controls And Their Functions

    MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS WJ-SX150 Matrix Switcher Front View OPERATE OPERATE LED WILL BLINK IF COOLING FAN MALFUNCTIONS q Operation indicator (OPERATE) Lights up when the power of the unit is turned on. Note: The indicator will blink to indicate rising tempera- ture in the matrix switcher.
  • Page 24 Camera Output connectors (CAMERA OUT 1–16) The video signal connected to the CAMERA IN connec- tor is supplied at these connectors. When the power of the matrix switcher is turned off, no signal is supplied at these connectors. y Camera Input connectors (CAMERA IN 1-16) Connect to cameras or camera site accessories.

  • Page 25: Wv-Cu360C System Controller (Terminal Mode)

    WV-CU360C System Controller (TERMINAL MODE) A template, on which “For Matrix Switcher (WJ-SX150)” is written, is provided with System Controller WV-CU360C. When using the template, place it on the surface of the controller. In these operating instructions, this template's illustrations are used for descriptions.
  • Page 26 #0 Focus buttons (FOCUS NEAR/FAR) Adjust the lens focus of cameras equipped with the specified lens. Press the NEAR and FAR buttons simultaneously. The lens focus is adjusted automatically, if the specified auto focus camera is equipped. #1 Zoom buttons (ZOOM WIDE/TELE) Press these buttons to zoom the lenses equipped with the specified cameras.
  • Page 27 $4 Next button (NEXT) Moves a tour sequence one step forward from the step previously paused on the active monitor. Also selects a camera. If the active monitor is in the spot mode, press NEXT while holding down the CAM (SET) button, to replace the currently selected camera with the next higher-numbered camera.

  • Page 28: Wv-Cu360Cj System Controller (Terminal Mode)

    WV-CU360CJ System Controller (TERMINAL MODE) A template, on which “For Matrix Switcher (WJ-SX150)” is written, is provided with System Controller WV-CU360CJ. When using the template, place it on the surface of the controller. OPERATE &3 &4 &5 CAM SETUP &6 &8...
  • Page 29 ^2 Joystick Use this joystick to manually operate cameras, camera site accessories and a recorder, or to move the cursor in SETUP MENU on the active monitor screen. Down Left, rewind*, backward field advance* Right, fast-forward*, forward field advance* *Available after pressing the RECORDER button while connecting to a recorder.
  • Page 30 SUSPEND: To suspend an activated alarm, press this button while holding down the SHIFT button. "ALM SUSPENDED" will appear on the monitor. To cancel the suspension, press this button while holding down the SHIFT button again. &5 Function 1 button (F1/CAM SETUP) Press this button while holding down the SHIFT button to open the camera's SETUP MENU on the active moni- tor.
  • Page 31 MODE DATA 4 ( 0 D ata ports (DATA) Exchange the control data with the matrix switcher via RS-485 cable (supplied with the system controller). (1 DC 9V Input jack (DC 9V IN) Use this jack to plug the AC adapter supplied with the system controller.

  • Page 32: Installations And System Connections

    INSTALLATIONS AND SYSTEM CONNECTIONS...

  • Page 33: Installations

    2. Place the rack mounting brackets on both sides of the matrix switcher and tighten with the four supplied screws (M4 X10). 3. Install the matrix switcher in the rack with the rack mounting brackets secured with four screws (procured locally).

  • Page 34: System Connection Examples

    IF COOLING FAN MALFUNCTIONS NEXT Note: Before connecting a terminal-mode system controller to the DATA 4 port, configure the system through SETUP MENU or WJ-SX150 Administrator Console. System Expansion Connection Connection with Digital Disk Recorder WJ-HD500 Series When connecting the camera output connectors to Digital Disk Recorder WJ-HD500 Series, the digital disk recorder can record all the camera channels.
  • Page 35 • With the multiplexer board, the recorded images of Camera 1 to 16 can be multiplexed to Digital Disk Recorder, WJ- HD100 Series or a time-lapse VCR. System Controller WV-CU For Matrix Switcher (WJ-SX150) NEXT Max. 4 System Controllers To use WJ-HD100 Series or a time-lapse VCR as a recorder, you need to install a multiplexer board inside the matrix switcher.

  • Page 36: Connections

    • Do not set the same address for more than one camera in an RS-485 chain. • Before connecting the RS-485 camera(s) to DATA 1, 2 and/or 3, configure the system through WJ-SX150 Administrator Console. DATA 3 DATA 2 DATA 1...

  • Page 37: Connections For Rs-485 Type Camera

    2. Set the LINE SELECT switch to 2 or 4. Notes: • Before connecting RS-485 cameras to DATA1 to 3, data port setting through WJ-SX150 Administrator Console is necessary. (Refer to p. 81 Data Port.) • Recommended for RS-485 communication is AWG#22 or thicker one.

  • Page 38: Connection With The Monitors

    CAMERA IN. DATA 3 DATA 2 DATA 1 RS485(CAMERA) CAMERA WJ-SX150 Matrix Switcher Connection with the Monitors The switch on the end unit should be set to Connect the monitors to the MONITOR OUT connectors at the unit's rear panel with the coaxial cable.

  • Page 39: Connection With The System Controllers

    DATA HDR DATA 4 DATA 3 DATA 2 TERM PS•DATA RS485(CAMERA) System Controller WV-CU For Matrix Switcher (WJ-SX150) NEXT NEXT System controller System controller DATA1 to DATA4 Port Matrix switcher's rear panel DATA 1 to 4 Notes: •...

  • Page 40: Connection With The Alarm Output

    (The control data and alarm signal will be output from the unit to the recorder.) To Buzzer 5. After the connection, set the unit’s EXT IN to GENLOCK ON through SETUP MENU or WJ-SX150 Administrator Console (Refer to pp. 60 or 66). Monitor WJ-SX150 Matrix Switcher...
  • Page 41 (The control data and alarm signal will be output from the unit to the recorder.) 5. After the connection, set the unit’s EXT IN to GENLOCK ON through SETUP MENU or WJ-SX150 Administrator Console (Refer to pp. 60 or 66). Notes: •...
  • Page 42 (Refer to WJ-HDB502 Operating Instructions.) 6. Refer to p. 39, p. 41 and p. 42 for MONITOR OUT con- nection, MULTI SCREEN OUT connection, and EXT IN connection. Monitor WJ-SX150 Matrix Switcher EXT IN EXT IN (PLAY IN) ALARM SERIAL...

  • Page 43: Connection With Digital Disk Recorder Wj-Hd100 Series

    2. Connect the matrix switcher’s EXT OUT (REC OUT) to the digital disk recorder’s VIDEO IN with a coaxial cable. 3. Connect the matrix switcher’s EXT IN (PLAY IN) to the digital disk recorder’s MONITOR OUT (PLAY) with a coaxial cable.

  • Page 44: Connection With The Time-Lapse Vcr (Panasonic Models)

    Connection with the Time-lapse VCR (Panasonic Models) 1. Configure the parameters of the multiplexer functions in the Multiplexer Mode (refer to p. 82) window of WJ-SX150 Administrator Console. Note: When VCR is selected in 610 RECORDER CONTROL in SETUP MENU (refer to p. 60), parameter configuration in the Multiplexer Mode window is unavailable.

  • Page 45: Cable Specifications

    4. Connect the matrix switcher’s EXT IN (PLAY IN) to the time-lapse VCR’s video output connector with the coaxial cable. Notes: • To use the alarm recording function, connect the matrix switcher’s all alarm output terminals (Alarm Output 1 to 4) to the time-lapse VCR’s ALARM IN.

  • Page 46: Connection With The Pc

    To use this function, it is necessary to assign one of the alarm input terminals (pin # 1 to 16) to the time adjusting terminal. D-sub9 SETUP MENU or WJ-SX150 Administrator Console can assign the signal. SERIAL Matrix Switcher Connect the matrix switcher's time adjusting terminal to those of the master clock with the twisted pair cable.

  • Page 47: Wj-Sx150 Setup Procedures

    WJ-SX150 SETUP PROCEDURES...

  • Page 48: Setup Procedures

    Refer to p. 64 WJ-SX150 ADMINISTRATOR CONSOLE for details of the platform and installation. Notes: • To use WJ-SX150 Administrator Console, you need to prepare a PC and a 9-pin D-sub cable.(Refer to p. 47.) • When Administrator Console, configuration data getting and putting are necessary between the unit and PC to acti- vate your configuration.
  • Page 49 VD2 timing pulse or control data with the camera output signals. • Camera title: Camera title is configurable to identify the camera images on the monitor. WJ-SX150 Administrator Console can configure the camera title including origi- nal characters.

  • Page 50: Wj-Sx150 Setup Menu (Osd)

    The MONITOR indicator will light up. 3. Press the SETUP button while holding down the SHIFT button on the system controller. WJ-SX150 SETUP MENU will appear on the active mon- itor as shown below, and the system controller's SETUP indicator will light up.
  • Page 51 How to Display To display this menu on the monitor, move the cursor to 100 TIME & DATE in SETUP MENU by moving the joystick to D or C. Parameters You can move the cursor to each parameter by moving the joystick to A or B.
  • Page 52 WJ-SX150 SETUP MENU 100 TIME&DATE Aug/21/2002 10:55 AM 200 D.S.T. 300 SEQUENCE 400 ALARM 500 CAMERA TITLE 600 RECORDER 700 SYSTEM 800 OPERATOR REGISTRATION 900 MULTIPLEXER 1000 MUX CAMERA TITLE Outside the U. S.: · Aug/21/2002... 21/08/2002 · D. S. T... SUMMER TIME 300 SEQUENCE TOUR NO.

  • Page 53: Daylight Saving Time)

    • The clock display pattern is changeable with the setting in WJ-SX150 Administrator Console. (Refer to p. 77.) The factory default setting is Month/Day/Year. • The clock is automatically adjusted to 0 second of the set- ting time and date when closing SETUP MENU.

  • Page 54: Alarm Setup

    TOUR NO: Press the NEXT or PREV button to select the tour number. Or press the numeric button(s) to enter a number. STEP: This stands for a tour sequence step. CAM: This stands for a camera number. CAM 0 to 16 is selectable.
  • Page 55 • PRE: This item stands for the preset position num- ber of a CAMnn. Enter the desired preset position number when selecting a combination camera. When selecting another type of camera, select --. • TOURnn (nn is a tour sequence number): Executes a tour sequence when an alarm input is accepted.
  • Page 56 • MUX MOTION DET This menu appears only when the Multiplexer board is installed in the unit. This stands for that the unit’s motion detector is activat- ed when a camera detects the brightness-level change and transmit an alarm signal. ON: The alarm-associated sequence/spot image is dis- played on a monitor, and alarm recording will start (if a recorder is connected to the unit.)

  • Page 57: Camera Title

    Notes: • If you repeat Step 1 after setting 4 motion-detection areas, “NG” will blink at the center of the monitor for two seconds. • To reset a motion-detection area, move the “+” mark on the desired area. Then, press the CLEAR button. The area will be reset.

  • Page 58: Recorder

    • When moving the joystick to TITLE 2 of 2, the monitor will display 1 of 2 (the previous page). • Original characters are configurable through WJ- SX150 Administrator Console, but they are not dis- played correctly in SETUP MENU. They are displayed as .
  • Page 59 CAM: This stands for the camera number. COMP: This stands for cable compensation. Select the desired setting according to the cable length. S: Less than 400 m (1 300 ft) M: 400 m (1 300 ft) to 700 m (2 300 ft) L: 700 m (2 300 ft) to 900 m (3 000 ft) Refer to p.

  • Page 60: Operator Registration

    (Refer to p. 14 for details on Priority Lock.) • LEVEL This stands for an operator's restrict level. It is configurable through Level Table (refer to p. 76) of WJ-SX150 Administrator Console what kind of restriction is given to the operator. 1 to 3 is available.

  • Page 61: Mux Camera Title

    Parameters Move the joystick to move the cursor. Press the NEXT or PREV button to select the desired para- meters. • ALARM EXT: Select this to gen-lock the unit with the recorder when an alarm is input to the unit. 002,004 to 128 (field): Select one of these alarm recording rates if the asynchronous unit is connect- ed to the unit.

  • Page 62: Wj-Sx150 Administrator Console

    4. Operate according to the direction in the window. Before Using WJ-SX150 Administrator Console 1. Select "Start" – "Program" – "Panasonic" – "WJ-SX150 Administrator Console x.xx*" or double-click the "WJ- SX150 Administrator Console x.x" icon on the desktop. 2. When you launch WJ-SX150 Administrator Console for the first time, the following window will appear on the PC screen.

  • Page 63: The Main Window

    Administrator Console while holding down the SHIFT key on the PC keyboard. Startup/Termination 1. Select "Start" – "Program" – "Panasonic" – "WJ-SX150 Administrator Console x.xx*" or double-click the "WJ- SX150 Administrator Console x.x" icon on the desktop. * x.x: Software version The UserID and Password Required window will appear on the PC screen.

  • Page 64: Recorder

    Select Setup Data File window (p. 84) (Account Manager): Account Manager window (p. 85) (Communication Port): Communication Port window (p. 86) (Panasonic): Opens the version information window of WJ- SX150 Administrator Console. Clicking on "OK" button will close the window. Notes: •...

  • Page 65: Put A File To Sx150

    Wait until the message “Completed!” appears on the screen. If the message “Connection error” appears, the PC is incorrectly connected to the unit. Confirm the set- tings of WJ-SX150 Administrator Console and retry the file putting. (Refer to p. 61 SERIAL PORT SPEED and p. 86 Communication Port.)

  • Page 66: Get A Configuration Data From Sx150

    Get a Configuration Data from SX150 Pressing this button will start the getting of the configuration data from the unit to the PC. How to Display To display this window, click on the SX150) button in the main window (p. 65). Parameters The file name of the configuration data appears.

  • Page 67: Group Sequence

    (DELETE) button Deletes the configuration of all the steps of the selected tour sequence. (COPY) button Copies the configuration of all the steps of the selected tour sequence to the another tour. (PASTE) button Pastes the cut or copied configuration to another tour sequence.

  • Page 68: Timer Event

    Timer Event This window configures the parameters of timer events: the schedule (daily, weekly or monthly) and action. Up to 30 events are configurable. tour sequence or spot mode is selectable. How to Display To display this window, click on the ton in the main window (p.

  • Page 69: Camera Cleaning

    Camera Cleaning This window configures the parameters of camera cleaning function: the schedule (daily, weekly or monthly) and cam- eras to be cleaned. How to Display To display this window, click on the Cleaning) button in the main window (p. 65). Parameters •...

  • Page 70: Alarm Mode

    (Save Exit) button: Saves the configuration and closes the Daylight Saving Time window. (Cancel Exit) button: Cancels the configuration and closes the Daylight Saving Time window. Alarm Mode This window configures the operation parameters when an alarm signal is input: an alarm mode, auto reset time and alarm input.
  • Page 71 REC ONLY: Only an alarm recording will start and monitors will keep sequence/spot images. Note: You cannot recover alarm-related operations from system controllers when REC ONLY is selected. OFF: An alarm input is accepted neither via the CAM- ERA IN connectors nor the RS-485 ports. The factory default setting is OFF.

  • Page 72: Alarm Event

    • Alarm Reset Time Select the time to reset the alarm input. The selectable time: OFF (not resetting the alarm), 10, 20, 30, 40, 50, 60, 120 or 180 (seconds) The factory default setting is 30 sec. (Save Exit) button Saves the configuration and closes the Alarm Mode win- dow.

  • Page 73: Operator Registration

    3 (Prohibited): The operator can neither display the camera image on the monitor nor control the pan- ning/tilting. (Add) button Adds a new operator to WJ-SX150 Administrator Console. (Edit) button The registered parameters become editable by clicking on this button after selecting the operator number.

  • Page 74: Level Table

    • Permission Click on each checkbox to classify the following operations by three levels. SX150 Setup: Setting up this matrix switcher system Camera Setup: Setting up the cameras Alarm History Display: Displaying the alarm history Video Loss History Display: Displaying the video loss...

  • Page 75: Auto Login/Logout (Auto Log-In/Log-Out)

    Auto Login/Logout (Auto Log-in/Log- out) This window configures the auto log-in/log-out parameter of each data port. An operator is selectable for auto log-in function. The log-out time is selectable for auto log-out function. How to Display To display this window, click on the Login/Logout) button in the main window (p.

  • Page 76: Cable Compensation/Vd2/Data

    Clock This window configures the unit's clock. The pattern of the Time & Date box depends on the setting through the Time & Date window. This picture is the example for U. S. model. • How to display To display this window, click on the the Time &...

  • Page 77: Camera Title

    This window configures the title for each camera. Up to 20 characters (camera title + alphanumeric charac- ters) are available for the title. WJ-SX150 Administrator Console has the following built-in characters: ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs t u v w x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , – . / : ;...
  • Page 78 Edit Font Window The Window Soon after Opening The Window during the Edit • How to Display To display this window, click on the Edit Font button in the Camera title window. • Parameters User Font Box: The registered user font characters are displayed here.

  • Page 79: Data Port

    Data Port This window configures the parameters of each data port (RS485, DATA 1 to 4 and DATA HDR port): the protocol, the baud rate (communication speed), and the connected cameras. How to Display To display this window, click on the in the main window (p.

  • Page 80: Multiplexer Mode

    Multiplexer Mode How to Display Note: This window can be displayed only when “Yes” is selected in the Recorder window. (Refer to p. 66.) Parameters To display this window, click on the Mode) button in the main window (p. 65.) •...
  • Page 81 Alarm Group REC Mode: Select the desired setting by clicking on the radio button. EXT: Select this to gen-lock the unit during the alarm recording. INT: Select this if the asynchronous unit is connected to the unit. When it is activated, the drop-down menu becomes also active so that you can select the desired normal recording rate.

  • Page 82: Select Setup Data File

    Multiplexer Title How to Display To display this window, click on the button in the main window (p. 65.) How to Display Note: This window can be displayed only when "Yes" is selected in the Recorder window. (Refer to p. 66.) Parameters The factory default settings are same as the illustration.

  • Page 83: Account Manager

    Account Manager This window configures the parameters of the operators who can control WJ-SX150 Administrator Console: the reg- istration, edit and deletion of an operator. The window soon after opening The window during the edit How to Display To display this window, click on the Manager) button in the main window (p.

  • Page 84: Communication Port

    Communication Port This window configures the PC's usable communication port number and its baud rate (communication speed). How to Display To display this window, click on the port) button in the main window (p. 65). Parameters • Parameter Group Com: Select the PC's communication port for the con- nection to the unit.

  • Page 85: Operating Procedures (Terminal Mode)

    OPERATING PROCEDURES (TERMINAL MODE)

  • Page 86: Log-In And Log-Out

    LOG-IN AND LOG-OUT Before starting the following procedures, all system compo- nents must be turned on. The following procedures are applicable when the system controller is connected to the unit. Log-in This operation is skipped when the auto log-in is set to ON. (Refer to p.

  • Page 87: Log-Out

    "NO USER" automatically appears on the LED display. AUTO PAN AUX2 ON SYS S CAM FUNC DEF ON CLEAR WIPER LOG OUT Auto log-out and the time to logout are configurable through WJ-SX150 Administrator Console. (Refer to p. 77 Auto Login/ Logout.)

  • Page 88: Monitor Selection And Camera Selection

    MONITOR SELECTION AND CAMERA SELECTION After the log-in procedure, the following operations are available to control the system. The operation begins with selecting a monitor, then the selected camera appears the active monitor. Monitor Selection 1. To select the desired monitor number (1 to 4), press the numeric button.

  • Page 89: Camera Selection

    Camera Selection 1. Select the desired monitor. (Refer to p. 90 Monitor Selection.) 2. Press the numeric buttons to select the desired camera number (1 to 16). 3. Press the CAM (SET) button. The selected camera's image will appear on the active monitor.

  • Page 90: Camera Control

    CAMERA CONTROL Buttons and control for cameras or camera site accessories are located on the right side of the front panel of the system controller. Included are zoom control, focus control, iris control, preset and pan/tilt controls. Normally, combination cameras equipped with the specific feature or a WV-RC100 or WV-RC150 Receiver are required to utilize these functions.

  • Page 91: Program Preset Position

    CALL PRESET PROGRAM PRESET AUTO PAN CAM FUNC CLEAR Note: To use the above function, you must set the pre- LOG OUT WJ-SX150 Administrator CALL PRESET T&D CAM ID EVENT AUX1 OFF AUX1 ON PROGRAM...

  • Page 92: Camera Function Control

    CAMERA FUNCTION CONTROL Camera Setup 1. Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.) 2. Press the F1 button while holding down the SHIFT but- ton. The CAM SETUP indicator on the controller will light up and the camera's SETUP MENU will appear on the active monitor.

  • Page 93: Changing To Black And White Images

    Changing to Black and White Images This function gets the clear camera images on the monitor while shooting the objects under low light conditions. 1. Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.) 2.

  • Page 94: Camera Panning Function

    Camera Panning Function There are three panning modes available as follows: auto pan, sort mode and sequence mode. Refer to p. 16 Camera-related Functions for details on each mode. 1. Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p.

  • Page 95: Camera Site Accessories Control

    CAMERA SITE ACCESSORIES CONTROL Receiver Control The following functions are available only when the receivers are included in the system and the specified camera housing is installed. Camera Housing Control Wiper Control 1. Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p.

  • Page 96: Running Sequence

    Group Sequence The following function is available only if a group sequence has been previously established in WJ-SX150 Administrator Console. As described earlier, a group sequence determines the assignment of monitors and cameras. Therefore, monitor selection is not required.

  • Page 97: Monitor Display Control

    MONITOR DISPLAY CONTROL On-screen Display (OSD) Control The procedure described below lets you determine the dis- play parameters, such as camera title, clock and status, on and off on the active monitor screen. Before controlling each item, monitor selection is neces- sary.

  • Page 98: System Status Table

    Lists the display mode on the moni- tors. SPOT: Spot mode Tnn: Tour Sequence mode (nn is the tour sequence number.) SET: WJ-SX150 Setup mode ALARM: Alarm Active mode ACK: Alarm ACK mode VLD H: VLD History Table ALM H: Alarm History Table SYS S:...

  • Page 99: Alarm History Table

    Alarm History Table There are 100 alarm records stored in chronological order in 10 pages of tables. 1. Select the desired monitor. (Refer to p. 90 Monitor Selection.) 2. Press the button 7 while holding down the OSD button. "OSD" will appear on the LED display, and the ALARM HISTORY table will appear on the active monitor as shown in the figure.

  • Page 100: Alarm Control

    Notes: • The association of the alarm inputs with cameras and monitors are changeable in SETUP MENU or WJ-SX150 Administrator Console. (Refer to p. 56 or p. 74.) • Alarm input will be automatically reset in 30 seconds.

  • Page 101: Resetting The Alarm Inputs

    • Description about alarm reset Alarm input 2 Alarm input 5 Alarm input 1 Matrix switcher Monitor 1 Monitor 1 Note: When more than one alarm is input and they are associated with the same monitor, they will be reset one by one. EVENT AUX1 ON 1.

  • Page 102: Multiplexer Operations

    Multiplexer board in the matrix switcher and config- ure the system through SETUP MENU and WJ- SX150 Administrator Console. [Refer to p. 34 Installing the Multiplexer Board, p.52 WJ-SX150 SETUP MENU (OSD), and p. 64 WJ-SX150 ADMIN- ISTRATOR CONSOLE.] Monitoring the Camera Picture Multiscreen Segment Switching Refer to p.
  • Page 103 Electronic Zooming (EL-ZOOM) Playback spot pictures can be electrically zoomed. 1. Select the desired monitor. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.) 2. Press the RECORDER button. (Refer to p. 116 Recorder Mode.) The system will enter the recorder mode. 3.

  • Page 104: Operating Procedures (Ps·data)

    OPERATING PROCEDURES (PS·DATA)

  • Page 105: When Using A Ps·data System Controller

    • When you select a monitor with a PS·Data system controller, you might enter its number as you do in the terminal mode. However, the matrix switcher regards a monitor as a unit, you need to select it by the unit number. (Refer to p. 109.) •...

  • Page 106: Monitor Control

    MONITOR CONTROL Refer to the system controller’s operating instructions before you login the system. After the log-in procedure, the following operations are available to control the system. The operation begins with selecting a monitor, then the selected camera appears the active monitor. Monitor Selection Unit addresses are given to each monitor.

  • Page 107: Running Sequence

    Group Sequence The following function is available only if a group sequence has been previously established in WJ-SX150 Administrator Console. The group sequence has ID numbers. Group 1 is 17, Group 2 is 18, Group 3 is 19, and Group 4 is 20.

  • Page 108: Monitor Display Control

    MONITOR DISPLAY CONTROL The procedure described below lets you determine on-screen display (OSD) items, such as camera title, clock and status, on and off on the active monitor screen. Before controlling each item, monitor selection is necessary. (Refer to p. 109 Monitor Selection.) 1.

  • Page 109: Alarm Control

    Notes: • The association of the alarm inputs with cameras and monitors are changeable in SETUP MENU or WJ-SX150 Administrator Console. (Refer to p. 56 or p. 74.) • Alarm input will be automatically reset in 30 seconds.

  • Page 110: Multiplexer Operations (Ps · Data)

    MULTIPLEXER OPERATIONS (PS · Data) This section will describe what you should take notice when using a PS·Data system controller. The same descriptions as the system controller’s operating instructions are not mentioned here. Refer to them. Controlling the Unit with a PS·Data System Controller 1.

  • Page 111: Expanded Function

    EXPANDED FUNCTION...

  • Page 112: Wj-Hd500 Series Control (Terminal Mode)

    WJ-HD500 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control Digital Disk Recorder WJ- HD500 Series. The following is the procedure of WJ-HD500 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p.
  • Page 113 3. To return to the spot display, exit from the recorder mode. Note: Multiscreen segment patterns are not configurable through WJ-SX150 Administrator Console. 1. Enter the recorder mode (Refer to p. 116 Recorder 2. To start the playback, press the PLAY button. The sys-...
  • Page 114 Manual Recording 1. Enter the recorder mode (Refer to p. 116 Recorder Mode.) 2. To start recording, press the WIDE and TELE buttons simultaneously. The digital disk recorder will start recording. 3. To stop the recording, press the STOP button while holding down the SHIFT button.
  • Page 115 Multiscreen Sequence Digital disk recorder starts a sequence according to the setting of WJ-HD500 Series. 1. Enter the recorder mode (Refer to p. 116 Recorder Mode.) 2. Press the button 7 while holding down the SHIFT but- ton. GROUP SEQ TOUR SEQ REW/FF PREV...

  • Page 116: Wj-Hd100 Series Control (Terminal Mode)

    SETUP MENU. [Refer to p. 34 Installing the Multiplexer Board, p.44 Connection with Digital Disk Recorder WJ-HD100 Series, p. 52 WJ-SX150 SETUP MENU (OSD), p. 64 WJ-SX150 ADMINIS- TRATOR CONSOLE, and Displaying WJ-HD100 Series SETUP MENU in this page.] The following is the procedure of WJ-HD100 Series SETUP MENU.
  • Page 117 • ALARM RECALL table The recorder’s alarm history will be displayed on the ALARM RECALL table. Move the cursor with the joystick to the desired alarm number, and then press the PLAY button. The associat- ed image will be played back. ALARM RECALL 1 OF 10 DATE 99 JUN 9.00 00:00:00 * T...

  • Page 118: Time-Lapse Vcr Control [Panasonic Models] (Terminal Mode)

    VCR (Panasonic Models), p. 52 WJ-SX150 SETUP MENU (OSD), and p. 64 WJ-SX150 ADMIN- ISTRATOR CONSOLE.] The following is the procedure of a Panasonic model time- lapse VCR. Controlling the Time-lapse VCR The following are the operating procedures of the time- lapse VCR via System Controller WV-CU360C/CJ.

  • Page 119: Time-Lapse Vcr Control [Non-Panasonic Models] (Terminal Mode)

    VCR's SETUP MENU. [Refer to p. 34 Installing the Multiplexer Board, p. 46 Connection with the Time-lapse VCR (Non-Panasonic Models), p. 52 WJ-SX150 SETUP MENU (OSD), and p. 64 WJ-SX150 ADMINISTRATOR CONSOLE.] • You cannot display the setup menu of a time-lapse VCR.

  • Page 120: Wj-Hd500 Series Control (Ps·data)

    WJ-HD500 SERIES CONTROL (PS·DATA) This section will describe what you should take notice when using a PS·Data system controller. The same descriptions as the system controller's operating instructions are not mentioned here. Refer to them. Refer the descriptions of terminal mode for illustrations. Controlling the Recorder with a PS·Data System Controller Recorder Mode Before operating the recorder, it is necessary to enter the recorder mode.

  • Page 121: Wj-Hd100 Series Control (Ps·data)

    WJ-HD100 SERIES CONTROL (PS·DATA) This section will describe what you should take notice when using a PS·Data system controller. The same descriptions as the system controller's operating instructions are not mentioned here. Refer to them. Refer the descriptions of terminal mode for illustrations. Controlling the Recorder with a PS·Data System Controller Recorder Mode Before operating the recorder, it is necessary to enter the recorder mode.

  • Page 122: Time-Lapse Vcr Control (Ps·data)

    The same descriptions as those of digital disk recorders are not mentioned here. Refer to p.xx for details. Notes: • Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the time-lapse VCR, and configure the system through WJ-SX150 Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU.

  • Page 123: Monitor Display When Avideo Loss Occurs

    MONITOR DISPLAY WHEN A VIDEO LOSS OCCURS Video Loss Display • When video loss of CAMERA IN nn (nn is a number) is detected, " LOSS CH nn" will blink on the monitor. • When more than one LOSS CH have occurred, "LOSS CH nn*"...

  • Page 124: Troubleshooting

    Check to see the following before request for repair. If a trouble cannot be removed even after checking and trying remedy, contact your dealer. Problem Matrix switcher does not power up. System controller(s) do (does) not log Monitor is not selectable.
  • Page 125 Problem The camera image is dim. The camera is not operable. OSD items (Clock, Camera title, Monitor status, Event) overlap one another. Tour/group sequence is not activated. Check item Dust may be sticking on the camera lens. The camera’s lens focus may not be proper.
  • Page 126 You are not authorized to operate the recorder. Remedy Set the alarm mode to SEQUENCE or HOLD in SETUP MENU or WJ-SX150 Administrator Console. SETUP MENU: Refer to p. 52. Adminstrator Console: Refer to p. 64. Set the alarm port to ON in SETUP MENU or WJ-SX150 Administrator Console.

  • Page 127: Appendix

    APPENDIX...

  • Page 128: Communication Protocol

    COMMUNICATION PROTOCOL The following pages detail the elements for communication between the unit and the PC. When operating the PC, make sure to conform the serial port's communication speed to that of the unit. The unit's communication speed is configurable by changing COM. SPEED in SETUP MENU. Data, parity and stop bits have been set as follows: Data length Parity bit...

  • Page 129: Command Table

    Command Table Basic Operation Transmission Command Item (ASCII) Log-in CMD:Wnnnnn-ppppp Log-out CMD:H00LG Monitor Selection CMD:HmmMS CMD:HmmCScc Camera Selection CMD:HmmCS+1 CMD:HmmCS-1 Starting tour sequence CMD:HmmSTnn Starting group sequence CMD:HmmSGn Pausing sequence CMD:HmmSP (PAUSE) Stopping sequence CMD:HmmSO (STOP) Sequence increment CMD:HmmSI (NEXT) Sequence decrement CMD:HmmSD (PREV)
  • Page 130 Alarm Control Transmission Command Item (ASCII) Alarm input OAIcc Alarm ACK CMD:HmmAK (Each monitor) Alarm reset CMD:HmmAR (Each monitor) Alarm all reset CMD:H00AR Alarm suspension Setup Control Transmission Command Item (ASCII) Display SETUP MENU CMD:HmmSS Return to normal view* CMD:HmmSE Move the cursor leftward CMD:AmmJL Move the cursor rightward...
  • Page 131 Camera Control Transmission Command Item (ASCII) PAN/TILT CMD:CmmPTccxxyy Zoom CMD:CmmZMccn Focus CMD:CmmFCccn Iris CMD:CmmIRccn Response (ASCII) Parameter (ASCII) — mm=Monitor No. cc=Camera No. • Panning speed xx=00 STOP xx=01 to 40(HEX) + direction panning (Max is 40 and min is 01) xx=81 to C0(HEX) - direction panning (Max is C0 and min is 81) •...
  • Page 132 Transmission Command Item (ASCII) Camera's SETUP MENU CMD:CmmCMccn Call Preset Position CMD:CmmPMccnn Program Preset Position CMD:CmmPSccnn Color/BW CMD:CmmBWccn Patrol CMD:CmmPAccn Camera Function CMD:CmmCFccnnn Auto Panning CMD:CmmAPccn Wiper CMD:CmmWPccn Defroster CMD:CmmDFccn AUX1 CMD:CmmA1ccn AUX2 CMD:CmmA2ccn Response (ASCII) Parameter (ASCII) — mm=Monitor No. cc=Camera No.
  • Page 133 + mark display ON n=2 Two-fold zoom n=4 x4Live image/Playback image n=8 x8Live image/Playback image ANS:RmmVSn Necessary when using a non-Panasonic recorder with the Multiplexer board. Transmission command changes the monitor display between live and playback image. n=0 Live image...
  • Page 134 Transmission Command Item (ASCII) Still display CMD:RmmSTcc CMD:RmmFF CMD:RmmRW Forward field advance CMD:RmmFA Backward field advance CMD:RmmRA Record CMD:RmmRC Index CMD:RmmSC Search editing area CMD:RmmTMn Group select CMD:RmmTG Alarm search CMD:RmmAS Response (ASCII) Parameter (ASCII) ANS:RmmSTccn Available only with the Multiplexer Transmission command toggles still display ON or OFF.
  • Page 135 Transmission Command Item (ASCII) Model No Software version Alarm history Video loss history Response (ASCII) Parameter (ASCII) qid:WJ-SX150 Matrix switcher's model No. qrv:*.** *.**=Matrix switcher's software version qrv:*.**/*.** *.**/*.**: Matrix switcher’s software ver- sion/Multiplexer board’s version qad:nnn:YYYYMMDD nnn=alarm-event total number...
  • Page 136 Miscellaneous Control Transmission Command Item (ASCII) Alarm display – Response (ASCII) Parameter (ASCII) ALM:cc:a:yyyymmdd:hhmm a=Event ss:b 0=ALARM 1=ACK 2=RESET yyyy=Year mm=Month dd=Day hh=Hour ss=Second b=Daylight saving time (summer time) 0=OFF 1=ON...

  • Page 137: Error Code List

    Error Code List Matrix switcher and external devices Error code(ASCII) Error type ER000 No error ER001 No associated command ER002 Parameter invalid ER003 Receiver buffer's overflow Matrix switcher and external devices Error code(ASCII) Error type ER301 Command invalid ER302 Parameter invalid...

  • Page 138: Worksheets

    Each worksheet's title is the same as that of WJ-SX150 Administrator Console. For example, the "Operator Registration" worksheet supports the "Operator Registration" window. The worksheets' rows, columns, and fields are arranged to match WJ-SX150 Administrator Console configuration require- ments. 1. Reproduce the worksheets. You may need dozens of copies.

  • Page 139: Checklist

    Checklist It is recommended that the worksheets be completed in the following sequence: Recorder Built in multiplexer board Recorder Control Unit Address EXT IN Tour Sequence Step Camera Step Camera Yes/No OFF/HD100/HD200/HD500/VCR Genlock off/on Preset position Dwell time Preset position Dwell time Date completed: ___/ ___/ ___ Tour __ / 16...
  • Page 140 Step Camera Group Sequence Group Monitor 1 Preset position Dwell time Monitor 2 Monitor 3 Tour __ / 16 Remark Monitor 4...
  • Page 141 Timer Event Schdule Daily Mode Weekly Monthly Action Tour Sequence Spot Camera Camera Auto Cleaning Schdule Daily Mode Weekly Monthly Auto Cleaning Cam #1 Camera Cam #2 Cam #3 Cam #4 Daylight Saving Time Start Every Hour Minute Every Sunday Monday Tuesday Wednesday...
  • Page 142 Alarm Mode Alarm Mode Dwell Sequence Mode Hold Mode Auto Reset Time Alarm Event ALM# Monitor# Alarm Port Alarm # Alarm Input Camera Site Alarm sec. Alarm Port Serial Port Mux Motion Det sec. Camera# / Tour sequence# Alarm Port N.O./N.C./Time N.O./N.C./Time N.O./N.C./Time...
  • Page 143 Operator Registration Operator# Password — — Timer Level Table Control SX150 Setup Camera Setup Alarm History Display Video Loss History Display System Status Display Single Alarm Reset All Alarm Reset Alarm Suspend Camera View Call Sequence Program Preset Position OSD Control Camera Control Recorder Control Recorder Setup...
  • Page 144 Auto Log-in/Log-out Auto Log-in DATA 1 DATA 2 DATA 3 DATA 4 Cable Compensation/VD2 Camera # Cable Compensation Cam 1 S / M / L Cam 2 S / M / L Cam 3 S / M / L Cam 4 S / M / L Cam 5 S / M / L...
  • Page 145 Data Port RS485 Port Protocol RS485 485 CAM DATA 1 485 CAM/CU360C DATA 2 485 CAM/CU360C DATA 3 485 CAM/CU360C DATA 4 CU360C/PS Data • Data mode (for DATA 4) • Logout Time sec. Alarm Data sec. Wait Time Group Address Multiplexer Multi Monitor Out Still Display...
  • Page 146 REC Out (Alarm) REC MODE Dynamic REC OFF / ALM-PRI / ALM-ONLY / GROUP GROUP ALM 1 ALM 2 ALM 3 ALM 4 ALM 5 ALM 6 ALM 7 ALM 8 ALM 9 ALM 10 ALM 11 ALM 12 ALM 13 ALM 14 ALM 15 ALM 16...

  • Page 147: Specifications

    SPECIFICATIONS Power Source: Power Consumption: Camera Input (1 to 16): Camera Output (1 to 16): Monitor Output (1 to 4): External Input: External Output: RS-485 (Camera) Port: Data Port: Alarm Port: Serial Port: Camera Switching Input: Ambient Operating Temperature: Ambient Operating Humidity: Dimensions: Weight: STANDARD ACCESSORIES...
  • Page 148 Unit Company of Matsushita Electric Corporation of America Security Systems www.panasonic.com/cctv Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Zone Office Eastern: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Central: 1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205 Western: 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840...

Table of Contents