Panasonic WJ-SX650/G Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Matrix Switcher
  5. WJ-SX650/G
  6. Operating instructions manual

Panasonic WJ-SX650/G Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Matrix Switcher
Operating Instructions
WJ-SX650/G
Model No.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WJ-SX650/G

Summary of Contents for Panasonic WJ-SX650/G

  • Page 1 Matrix Switcher Operating Instructions WJ-SX650/G Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
  • Page 2 • All work related to the installation of this product should be A replacement fuse cover can be purchased from your local Panasonic made by qualified service personnel or system installers. Dealer.

  • Page 3: Important Safety Instructions

    Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Page 4: Table Of Contents

    CONTENTS Important Safety Instructions ..........3 Monitor Control ..............58 I Monitor Selection ............58 Limitation of Liability ............5 I Monitor Lock ............... 58 Disclaimer of Warranty ............5 Camera Control ..............59 Trademarks and Registered Trademarks ......5 I Camera Selection ............

  • Page 5: Limitation Of Liability

    AND/OR THE CORRESPONDING PRODUCT (S). THIRD PARTY’S RIGHT. Disclaimer of Warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE (3) UNAUTHORIZED DISASSEMBLY, REPAIR OR MODIFI- TO ANY PARTY OR ANY PERSON, EXCEPT FOR CERTAIN CATION OF THE PRODUCT BY THE USER;...

  • Page 6: Precautions

    Precautions CAUTION: These servicing instructions are for use by qual- • Cleaning ified service personnel only. To reduce the risk of elec- Turn the power off when cleaning the unit. Otherwise it tric shock do not perform any servicing other than that may cause injuries.

  • Page 7: About These Operating Instructions

    About These Operating Instructions These operating instructions are classified roughly as fol- This document uses the following terms for classifica- lows: tion of devices. The (This ) unit: Matrix Switcher WJ-SX650 • Operations (pp. 55 to 86) Video input board: Video Input Board WJ-PB65C32 Video output board: Video Output Board WJ-PB65M16 Contains how to operate the system.

  • Page 8: Preface

    Preface Matrix Switcher WJ-SX650 Series (or SX650 Series) are designed for a surveillance control system. WJ-SX650 Series (or SX650 Series) is the general term of following models. Matrix Switcher WJ-SX650 (Video Input Board WJ- PB65C32 x 1 and Video Output Board WJ-PB65M16 x 1 have been installed.) Card Cage WJ-SX650U (For additional installation of video input boards and video output boards)

  • Page 9: Major Operating Controls And Their Functions

    Major Operating Controls and Their Functions I WJ-SX650 Matrix Switcher/WJ-SX650U Card Cage G Front View <Front panel attached> <Front panel detached> RESET No. MODE PULL OPERATE POWER OPERATE LED WILL BLINK IF COOLING FAN MALFUNCTIONS TEST RESET MODE Matrix Switcher WJ-SX Normally, do not touch.
  • Page 10 G Rear View <WJ-SX650U> <WJ-SX650> SIGNAL GND SIGNAL GND EXTENSION 3 IN EXTENSION 2 IN MODE RS485 (CAMERA) MODE MODE RS485 (CAMERA) MODE IN C-3 EXTENSION 3 IN EXTENSION 2 IN MODE RS485 (CAMERA) MODE MODE RS485 (CAMERA) MODE IN C-3 VIDEO OUT 4 VIDEO OUT 3 VIDEO OUT 2...

  • Page 11: I Video Input Board Wj-Pb65C32

    I Video Input Board WJ-PB65C32 Video input board is composed of a main board (installed into the front side) and rear boards (x 3)(installed into the rear side). G Front View RESET No. MODE q Board Number Switch (No.) e Reset Switch (RESET) Refer to p.

  • Page 12: I Video Output Board Wj-Pb65M16

    I Video Output Board WJ-PB65M16 Video output board is composed of a main board (installed into the front side) and rear boards (x 3)(installed into the rear side). G Front View TEST RESET MODE q Output Mode Selection Switches (MODE) e Test port (TEST) Refer to p.

  • Page 13: I Monitor Display Information

    !3 VS Output Connector (VS OUT) !4 Serial Port (SERIAL) Supplies VS output signals to external devices. While !1 Connects to a PC. is accepting a VS input signal, !3 supplies an output signal synchronizing the VS input signal. While !1 is not Note: When q is set as Video Output Board 2, r, !1 , accepting the VS input signal, !3 supplies an internal !2 , !3 , and !4 are not available.

  • Page 14: I System Controller Display Information

    Notes: r Busy • During the alarm acknowledgement (ACK) status (refer Busy + monitor number (Blinking) to p. 69), event information is highlighted. A selected monitor is controlled by a higher-priority • When two or more alarm events have occurred, "∗" is operator.
  • Page 15 G WV-CU360C/CJ When the PROHIBITED indicator is lighting: • You have entered a wrong value. • You have tried to activate a group sequence or group preset on a monitor not assigned. • You have tried an operation restricted by the opera- tor's setting.

  • Page 16: Installations

    Installations CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. The following is the installation flow of this unit.

  • Page 17: I Switch Settings For Video Input Main Board

    Important: • The software versions of Video Output Board 1 and 2 must be the same. If the software version of each board is different, upgrade the lower version to the higher one. (Refer to p. 42 or p. 55 for how to check the software version.) •...

  • Page 18: I Switch Settings For Video Output Main Board

    I Switch Settings for Video Output Main Board When mounting an additional video input board, up to 32 monitors can be connected to the unit. SW1, SW2, SW3, SW4 SW4006 HOST FUNC Front view of video output main board TEST RESET MODE 1 2 3 4 5 6 7 8...

  • Page 19: I Mounting Video Input And Output Boards

    I Mounting Video Input and Output Boards To use additional video input or output boards, mount these boards into the expansion slots of the unit after checking the board composition and performing switch settings (refer to pp. 16 to 18). The following is the figures describing recommended board composition.

  • Page 20: I Board Mounting Procedure

    I Board Mounting Procedure 3. Remove the front panel by loosening the screws. The following example is the procedure to mount a network board into the expansion slot of the unit. Note: Before the procedure, power off the unit. 1. Remove the expansion slot panel from the rear side. 4.

  • Page 21: I Installing The Main Unit

    I Installing the Main Unit 3. Mount the unit into the rack by fixing the rack mounting screws (locally procured: 8 pcs). (Refer to the following Places to avoid illustration.) • Places exposed to direct sunlight or near a source of EIA 19 inch rack heat such as a radiator •...

  • Page 22: Connections

    Connections Important: Use only the recommended BNC connectors listed below. RECOMMENDED Tip dimensioins inside the BNC Video (coaxial) Cable fl 1.32 mm — fl 1.37 mm (inside) fl 0.13 mm — fl 0.69 mm Standards For U.S.A. MIL-C39012C or MIL-C39012/16F For Europe BS CECC 22120:1981 For Japan...

  • Page 23: I Basic System Connections

    I Basic System Connections The following is a connection example to use one unit. This unit x 1, camera x 30, monitor x 16, and recorder x 2 Camera 1 to 30 Monitor 1 to 16 CAMERA IN VIDEO OUT (Loop-thru output) Video input board MODE switches WV-CU950/650...

  • Page 24: I Expanded System Connections

    I Expanded System Connections The following is a connection example to use two or more units. This unit x 3, camera x 150, monitor x 32, and recorder x 10 Camera 1 to 150 CAMERA IN CAMERA IN Video input board VIDEO OUT Card cage connection (Loop-thru output)
  • Page 25 This unit x 4, camera x 240, monitor x 32, and recorder x 15 Camera 1 to 240 CAMERA IN Video input board CAMERA IN VIDEO OUT Card cage connection (Loop-thru output) Video input board Monitor 1 to 32 Video input board MONITOR OUT Video input board Card cage connection...

  • Page 26: I Card Cage Connections

    I Card Cage Connections Card Cage WJ-SX650U is used for mounting additional Video Input Board WJ-PB65C32. Up to 3 video input boards can be mounted into a card cage. The following is a connection example to use additional card cages. •...

  • Page 27: I Camera Connections

    I Camera Connections The following is a connection example to use system cameras and combination cameras. Notes: • Make sure that the cable length is less than 1 200 m {3 900 ft} between the camera site and the unit when using 5C-2V or equivalent cables.
  • Page 28 G 1:1 Connection One camera is connected to one RS-485 (CAMERA) port. Example: RS-485 cameras are connected to the CAMERA IN 9 and 12 connectors. 4-wire 2-wire Connector communication communication RS485 Junction Unit (CAMERA) 1 WV-CA48/JN RS485 1 2 3 4 1 2 3 4 RS-485 cable (CAMERA) 2...

  • Page 29: I Monitor Connections

    I Monitor Connections • The MONITOR OUT 1 to 16 connectors of Video Output Board 1 are assigned to Monitor 1 to 16. • The MONITOR OUT 1 to 16 connectors of Video Output Board 2 are assigned to Monitor 17 to 32. DATA 4 DATA 3 DATA 2...

  • Page 30: I Recorder Connection

    I Recorder Connection The following is a connection example to use recorders. * Refer to “Readme.txt” on the supplied CD-ROM for details on model numbers. G Connection to Video Output Connectors of Recorders To display recorder images on monitors connected to this unit When the video output connectors of recorders are connected to CAMERA IN connectors of this unit, recorder images can be displayed on Monitor 1 to 32.
  • Page 31 EXTENSION 3 IN EXTENSION 2 IN RS485 (CAMERA) RS485 (CAMERA) MODE MODE MODE MODE IN C-3 VIDEO OUT 4 VIDEO OUT 3 VIDEO OUT 2 VIDEO OUT 1 ALARM IN IN X-2 Video input board IN X-1 CAMERA IN Up to 16 unused connectors CAMERA IN 32, 31 •...
  • Page 32 Notes: • When changing connections, perform the LCN settings of camera input channels supplying video input signals to recorders. The LCN settings are performed in "System" – "Recorder" – "LCN setting". • Camera input signals are looped through the unit. Monitor display information (camera title, etc.) are not recorded. Video input signals are supplied from recorders to the CAMERA IN 31 and 32.
  • Page 33 G Connection Example with WJ-HD300 Series, MODE switch settings WJ-HD300A Series, or WJ-HD350 Series Line termination: (#2: ON) Line termination: * The following are abbreviations. (#2: OFF) • Unit Address S: Unit Address (System): • Unit Address C: Unit Address (Controller) Note: Normally, set #2 to ON.
  • Page 34 G Connection Example with WJ-RT416 Series Important: When using WJ-RT416 Series, “Unit Address C: 1” is unavailable. * The following are abbreviations. • Unit Address S: Unit Address (System): • Unit Address C: Unit Address (Controller) DATA 4 DATA 3 DATA 2 DATA 1 TERM.ON...

  • Page 35: I Recorder Settings

    I Recorder Settings I System Controller Connection Be sure to perform the settings for connected recorders in The following is a connection example to use system con- SETUP MENU of recorders. trollers. You can set w to t after connections. However, you must There are two options to connect system controllers to this set q separately for each recorder before connections.
  • Page 36 Line termination: ON (#2: ON) DATA 4 DATA 3 DATA 2 DATA 1 TERM.ON TERM.OFF Video Output Board 2 HDR4/TMNL8 HDR3/TMNL7 TMNL6 TMNL5 Video Output Board 1 HDR2/TMNL4 HDR1/TMNL3 TMNL2 TMNL1/PS DATA MODE MODE MODE DATA MODE MODE DATA MODE EXTENSION 1 TERM.

  • Page 37: I Alarm Sensor Connections

    I Alarm Sensor Connections I External Device Connections Alarm input signals can be supplied by alarm sensors con- With external device connections, alarm output, alarm nected to the ALARM IN port at the video input board. The recover input, time adjust input, and time adjust output sig- following are the ALARM IN port details.

  • Page 38: I System Status Check

    Display example of SYSTEM STATUS Terminal Duration Remarks Alarm Output 1 to Until reset Open Collector output, <Monitor 1> 24 V, 100 mA maximum Alarm Recover 100 or more Non-voltage make con- LCN, MODE, KB and OPE parameters are highlighted Input 1 to 16 tact output for monitors during the alarm mode status.

  • Page 39: Setup Procedure

    Setup Procedure Before operation, setup of this unit is required. Setup is per- <To perform settings in WJ-SX650 Series Administrator formed from WJ-SX650 Series Administrator Console installed Console> on a PC. (Some settings are available from SETUP MENU of "System" – "DATA Port" this unit.) The following is an example of setup procedure.
  • Page 40 <To perform settings in SETUP MENU> VD2/DATA/CABLE COMPENSATION (Refer to p. 54.) 5. Perform the RS-485 camera settings. CAM001 to 150: If you use RS-485 cameras, select desired parameters for the RS-485 (CAMERA) ports and camera unit numbers. <To perform settings in WJ-SX650 Series Administrator Console>...

  • Page 41: Wj-Sx650 Series Administrator Console

    2000 Professional SP4 Note: In the factory default installation, C:\Program ® ® Microsoft Windows XP Professional SP2 Files\Panasonic\WJ-SX650 is created, and files will be ® ® Microsoft Windows XP Home Edition SP2 copied to the directory. Note: To work WJ-SX650 Series Administrator Console on ®...

  • Page 42: I Starting Up

    I Starting Up I Window Details 1. Select "Start" – "All Programs" – "Panasonic" – "WJ- SX650 Series" – "WJ-SX650 Series Administrator Console x.xx". (x.xx is the version number.) Then, run the program. WJ-SX650 Series Administrator Console will start up, and the login window will be displayed on the PC screen.

  • Page 43: I Tooltip Details

    I Tooltip Details Notes: • Do not edit the setup data files by using text editors, etc. You may become unable to open the setup data files. • To perform q, w, and u, this unit needs to be con- nected to the PC with an RS-232C cable.
  • Page 44 Reference No. Explanation 2005 to 2099: Year 1 to 12: Month 1 to 31: Day [24-h time format] 0 to 23: Time [12-h time format] 1 to 12: Time 00 to 59: Minute AM, PM: Morning, Afternoon DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DDDD, DD/Mmm/YYYY, Mmm/DD/YYYY: Date Format Japanese, English, French*, Spanish*, German*, Italian*, and Russian*: Language * In the actual display, these parameters are displayed in their own languages.
  • Page 45 Reference No. Explanation 1 to 1024: Alarm Output number Alarm output signal is supplied from the ALARM OUT 1/2 port or the SERIAL port. (65 to 1024 are supplied from the SERIAL port only as a serial command.) Note: To activate serial command transmission, set Alarm Output to ON in "Communication" – "Serial Command".

  • Page 46: Factory Default Settings

    Factory Default Settings G Display In the factory default, each setting item has been set as fol- lows. Items attached with "*" can also be set in SETUP "Display" MENU. Date Format: DD/MM/YYYY Time Format: 24-h Language: English* I Factory Default Settings of WJ- SX650 Series Administrator "DST/Summer Time"...
  • Page 47 "Group Sequence" "Alarm Event" Group Sequence 1: 4 cameras among LCN 1 to 64 are Terminal Alarm 1 to 256: SPOT, LCN 1 to 256, Monitor 1 sequentially switched for 2 seconds on Monitor 1 to 4. Camera Alarm 1 to 256: No settings Group Sequence 2: 4 cameras among LCN 65 to 128 are Recorder Alarm 1 to 256: No settings sequentially switched for 2 seconds on Monitor 5 to 8.

  • Page 48: I Factory Default Settings Of Setup Menu

    G Controller "Monitor Access" DATA Monitor 1 to 8 All the ports are enabled. (Checked) "Auto Login/Logout" Auto Login: All the ports are enabled. (Checked) (User ID: 650) Auto Logout: All the ports are unabled. (Not Checked) "Key Assignment" (Available for WV-CU950/650) DATA 1 to 8 Function Iris Reset...

  • Page 49: Setup Menu (Osd)

    Setup Menu (OSD) G Top Menu This chapter explains about SETUP MENU (On-screen Display setup menu) of this unit. When SETUP MENU is opened, the top menu is displayed on the monitor. I Basic Operations WJ-SX650 SETUP MENU To control SETUP MENU, display SETUP MENU on a moni- tor.

  • Page 50: I Time & Date

    I TIME & DATE I ALARM You will set the current time and date. You will perform the settings of alarms (terminal alarms, When you select TIME & DATE on the top menu, the follow- camera alarms, recorder alarms, serial alarms, and video ing menu is displayed.

  • Page 51: I Recorder

    I RECORDER • RECORDER ALARM Select ON or OFF to accept or not accept recorder alarm You will check the settings of DATA ports to connect input signals. (The factory default is OFF.) recorders and CAMERA IN connectors to supply video ON: Accepts recorder alarm input signals.
  • Page 52 RECORDER CAMERA IN No. CAM (Camera input channel No.: Video Input board 1 to 8) INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT BOARD BOARD BOARD BOARD BOARD BOARD BOARD BOARD Notes: • ON is not available for recorders when camera input channels are set for RS-485 cameras. To activate recorder connec- tions, delete the RS-485 camera settings.

  • Page 53: I System

    I SYSTEM G DATA PORT Menu You will perform the system settings required to transmit data between the unit and connected devices. When you 510 DATA PORT select SYSTEM on the top menu, the following menu is dis- DATA TYPE COMM.
  • Page 54 G VD2/DATA/CABLE COMPENSATION G RS485 CAMERA Menu Menu 540 RS485 CAMERA 1 of 2 INPUT BOARD=8 CAM RS485 UNIT CAM RS485 UNIT 530 VD2/DATA/CABLE COMPENSATION 1 of 2 INPUT BOARD=8 CAM VD2 DATA CABLE CAM VD2 DATA CABLE 225 ON 233 ON 226 ON 234 ON...

  • Page 55: I Information

    I INFORMATION You can check whether the connected video input or output boards are working properly. When you select INFORMA- TION on the top menu, the following menu is displayed. 800 INFORMATION OUTPUT BOARD1 V1.01 OUTPUT BOARD2 V1.01 ∗ INPUT BOARD1 ∗...

  • Page 56: Login And Logout

    Login and Logout I Operator Registration Before logging into the system, operator registration is required. Operator registration is performed in "Operator" – "Operator" of WJ-SX650 Series Administrator Console. The factory default of operator information is as follows. Operator No. User ID Password Level Priority...

  • Page 57: I Power-On/Off

    I Power-on/off I Operation End (Logout) 1. To power on the unit, press the power switch behind You need to log out of the system: the front panel. • When finishing operations and powering off 2. Power on system controllers and recorders. (Refer to •...

  • Page 58: Monitor Control

    Monitor Control The following is the procedure examples for monitor opera- SHIFT button. tion. Refer to p. 74 Lists of Operations and Functions for The selected monitor will be locked. other monitor control procedures not described here. 2. To release the monitor lock, press the MON LOCK but- ton again while holding down the SHIFT button.

  • Page 59: Camera Control

    Camera Control The following is the procedure examples for camera opera- • When you select another camera or camera position, tion. Refer to p. 74 Lists of Operations and Functions for the memorized steps are updated. other camera control procedures not described here. •...

  • Page 60: I All Cameras Control

    I All Cameras Control All cameras connected to the unit can be controlled at a time. • All home positions: All cameras will be moved to the home positions. • All auxiliaries OFF: AUX 1 and 2 outputs of cameras will become OFF.

  • Page 61: Recorder Control

    Recorder Control G Note The following is the procedure examples for recorder con- trol. Refer to p. 74 Lists of Operations and Functions for Recording follows the manual recording setting of recorder. other recorder control procedures not described here. The following procedures are available when a camera is selected.

  • Page 62: I Playing The Latest Recorded Image

    I Playing the Latest Recorded 3. Press the MENU button repeatedly until "System Setup" appears on the LCD. Image Notes: • This operation is not available for WJ-RT416 Series. • When you use WJ-HD300 Series, start playback before 4. Press the F1 button. SETUP MENU of recorder will be pressing the GO TO LAST button.

  • Page 63: Running Sequence

    Running Sequence I Descriptions of Sequence Sequence is the function to switch camera images automatically. There are two sequences: • Tour sequence • Group sequence G Tour Sequence Camera images are displayed on a selected monitor, and they are sequentially switched according to the setting. •...
  • Page 64 G Sequence Setting Sequence setting is performed in "Sequence" of WJ-SX650 Series Administrator Console. The following settings are available for each sequence step. Setting item Parameter Remarks LCN (Logical Camera Number) 1 to 999 Camera position numbers are also avail- able for parameters.

  • Page 65: I Tour Sequence

    I Tour Sequence I Group Sequence/Preset G WV-CU950/650 G WV-CU950/650 1. Enter the desired sequence number by pressing the 1. Select monitor assigned desired group numeric buttons. The entered number will appear on sequence/preset. (Refer to p. 58 Monitor Selection.) the LCD.

  • Page 66: I Sequence Pause

    I Sequence Pause You can pause an active tour or group sequence. When a group sequence is paused on a monitor, all sequences will be simultaneously paused on other monitors. 1. Press the SEQ PAUSE* (or PAUSE* ) button. Sequence will be paused. 2.

  • Page 67: Alarm Descriptions

    Alarm Descriptions I Alarm Occurrence When this unit accept an alarm input signal (terminal alarm, camera alarm, recorder alarm, serial alarm, or video loss), an alarm event (tour sequence, etc.) is activated automatically. Each alarm input signal is associated with an alarm event setting. (The setting activates the alarm input signal and alarm event.) Up to 1 024 alarm event settings are available.

  • Page 68: I Alarm Modes

    I Alarm Modes G Tour Sequence Tour sequence is activated on the associated monitor. The following alarm modes ("Display Mode" settings) are available. (Alarm mode follows the setting of "Display Mode".) G Group Sequence/Preset Group sequence is activated on the associated monitors. G Spot The image of associated camera will be displayed on the G OFF...

  • Page 69: Alarm Control

    Alarm Control I Alarm Acknowledgement (ACK) G WV-CU360C/CJ To change alarm pictures on the monitor, press the NEXT By acknowledging an alarm occurrence on an associated or PREV button. The alarm pictures will be displayed in monitor, you can control alarm pictures. order or reverse order.

  • Page 70: I Return To Alarm Mode Status

    G WV-CU950/650 WV-CU950/650 WV-CU360C/CJ Press the ALM RECALL button. The Alarm History Display will appear on the selected monitor. Notes: • Alarm all reset will also be conducted when setting changes are performed in SETUP MENU or WJ-SX650 Series Administrator Console. •...
  • Page 71 • ACTION POWER: The unit is powered on. (Highlighted: Power off) M01 to 32: Alarm occurred to Monitor 1 to 32. (For group sequence and group preset, the smallest monitor number is displayed with "∗".) C001 to C999: Camera 001 to Camera 999 was activat- ed for spot mode.

  • Page 72: Timer Descriptions

    Timer Descriptions I Timer Event Example of timer event setting • To activate Tour Sequence 2 on Monitor 1 on January 1, With the timer event setting, timer events (tour sequence, 19:00 to 20:00 etc.) can automatically be activated on the desired time Schedule Mode: Daily and date.
  • Page 73 • ALARM IN (Camera) – Not Use Setting item Parameter Remarks Select this setting to activate auto tracking at the specified Schedule Mode Daily Camera event is preset position. (Starting preset position) Auto tracking is activated every performed during the specified time. (The camera becomes day.

  • Page 74: Terminal Mode Operation

    Terminal Mode Operation This chapter includes operation list, function list, and function menu flow of the terminal mode. Operators can be given restrict levels for each operation and function according to the user level settings. I Lists of Operations and Functions •...
  • Page 75 Function list of WV-CU950/650 and WV-CU360C/CJ Function WV-CU950/650 WV-CU360C/CJ Note Login Enter the number. Enter the number. q Enters the user ID. (Numeric buttons) (Numeric buttons) → [CAM (SET)] → [CAM (SET)] w Enters the password. Enter the number. Enter the number. (Numeric buttons) (Numeric buttons) →...
  • Page 76 Function WV-CU950/650 WV-CU360C/CJ Note System Setup Open "System Setup" main WV-CU950/650, WV- menu. CU360C/CJ: → Refer to p. 74 Operation list of WV-CU950/650 and WV- • Opens SETUP MENU. [F1] [SHIFT] + [SETUP] CU360C/CJ for setup menu operations. • Closes SETUP MENU. [F2] [SHIFT] + [SETUP] Note: When you open SETUP...
  • Page 77 Function WV-CU950/650 WV-CU360C/CJ Note System Status Display Open "System Status" main menu. → • Opens System Status [F1] [OSD] + [SYS S] Display. • Closes System Status [F2] [OSD] + [SYS S] Display. Alarm History Display [ALM RECALL] [OSD] + [ALM H] WV-CU950/650, WV- CU360C/CJ: Every pressing the buttons...
  • Page 78 Camera control Function WV-CU950/650 WV-CU360C/CJ Note Preset Position Registration Enter the number. (Numeric Enter the number. (Numeric buttons) buttons) → [SHIFT] + [PGM PRESET] → [SHIFT] + [PROGRAM PRESET] Calls the preset position. Enter the number. (Numeric Enter the number. (Numeric WV-CU950/650, WV- buttons) →...
  • Page 79 Function WV-CU950/650 WV-CU360C/CJ Note Focus control • Brings the lens focus farther [FOCUS FAR] [FOCUS FAR] WV-CU950/650, WV- from the object. CU360C/CJ: Lens focus will keep going farther from the object while this button is held down. • Brings the lens focus nearer [FOCUS NEAR] [FOCUS NEAR] WV-CU950/650, WV-...
  • Page 80 Function WV-CU950/650 WV-CU360C/CJ Note Auto pan Open "Auto Pan Setup" menu. [SHIFT] + [CAM FUNC] four → times (AUTO MODE setting menu appears on the LED display. )→ • Activates the auto pan. [F1] WV-CU360C/CJ: Pressing [AUTO PAN] is also available.
  • Page 81 Function WV-CU950/650 WV-CU360C/CJ Note Defroster • ON [DEF ON] [SHIFT] + [DEF ON] • OFF [SHIFT] + [DEF OFF] [SHIFT] + [DEF OFF] All Cameras Control Open "All CAM Control" main WV-CU950/650: menu. → This operation is not available for cameras restricted by the •...
  • Page 82 Function WV-CU950/650 WV-CU360C/CJ Note Recorder On-screen display [OSD] Not available WV-CU950/650: (OSD) ON/OFF Every pressing the button can display or hide all the information. Multiscreen display WV-CU950/650, WV- CU360C/CJ: • Without numeric entry, [0] → [MULTI SCREEN] [0] → [SHIFT] + [MULTI •...
  • Page 83 Function WV-CU950/650 WV-CU360C/CJ Note <During search list display> WV-CU950/650, WV- • List/Thumbnail Switching [F1] [F1] CU360C/CJ: (Not available for WJ-RT416 Every pressing this button Series) can change the search list between the list window and thumbnail window. • Text information display ON [F3] Not Available (Not available for WJ-RT416...
  • Page 84 Function WV-CU950/650 WV-CU360C/CJ Note A – B repeat playback Open "HD300 A - B Repeat" Not available Playback is started when you menu. → (Not available for WJ-RT416 mark the end point. Series) • Sets the start point (A) for [F1] –...

  • Page 85: I Menu Flow (Wv-Cu950/650)

    I Menu Flow (WV-CU950/650) If you press the MENU button without selecting a recorder Keep pressing the SHIFT button. Keep pressing the SHIFT button. : SHIFT + MENU buttons : MENU button If you enter the menu function number, and then press the MENU button, the specified menu will appear.

  • Page 86: Operation (Other Than Terminal Mode)

    Operation (Other than Terminal Mode) This chapter includes notifications on operations from sys- tem controllers in the PS·Data mode, a web browser • Recorder control accessing the recorder, or a PC. When using WV-CU360C/CJ, refer to the operating instruc- tions of recorder. •...

  • Page 87: I Connections Of Matrix Switchers (Wj-Sx650 Series) And A Ps·data System Controller

    I Connections of Matrix Switchers (WJ-SX650 Series) and a PS·Data System Controller By connecting a PS·Data system controller (WV-CU950/650, CONTROLLER NO.: 1) to the DATA ports of the units with Cable Kit WV-CA48/10K, you can control these units from the system controller. (Refer to p. 36 for details on connections.) Notes: •...

  • Page 88: Glossary

    Camera event: Refer to p. 72. event settings such as sequence. VD2: Timing pulse to display the images of Panasonic cam- Auto tracking: Camera's function to detect motion of the eras on the monitor. If VD2 is set to ON, image switch- image and track the moving object automatically.
  • Page 89 Cable compensation is the function to compensate the attenuation. Export: Function to save the settings of tour sequence or group sequence in export files (csv format). This func- tion available when using WJ-SX650 Series Administrator Console. Export is performed separately for each sequence program.

  • Page 90: Troubleshooting

    Troubleshooting Check the following before requesting repair. If a trouble cannot be corrected even after checking and trying remedy, contact your dealer. I Matrix Switcher WJ-SX650 Series Check item and remedy Reference Problem • Check if the power plug is properly connected to the AC out- –...
  • Page 91 Check item and remedy Reference Problem • When the unit is powered on or a camera is connected, black bars may be seen on the monitor for several seconds with Black bars can be seen on a images not supporting VD2 (images from recorder or cam- monitor.
  • Page 92 Check item and remedy Reference Problem • Check the LCD (or LED) display or indicators of system con- troller. When "Busy (or the BUSY indicator)" is blinking (or 14, 15 lighting), recorder control is not available. • Depending on the recorder status, response may be delayed. –...
  • Page 93 Check item and remedy Reference Problem Auto tracking ended before the end time of camera event • Check if another camera event is not set for the camera. setting. • Check if the alarm input signal setting is ON in ALARM of SETUP MENU.

  • Page 94: I Wj-Sx650 Series Administrator Console

    I WJ-SX650 Series Administrator Console Check item and remedy Reference Problem • Check if the camera number not registered is set for the cam- "!" mark is displayed in the era position, tour sequence, group sequence, timer event, – LCN entry field. alarm event, recorder, or camera input channel.

  • Page 95: I Power Cord, Connectors, And Power Plug

    I Power Cord, Connectors, and Power Plug Check the power cord, connectors, and power plug regularly. Check item and remedy Reference Problem The power cord insulation is damaged. The power cord, plug and connectors are worn out. This may The power cord, plug and result in electric shock or a fire.

  • Page 96: Specifications

    Specifications I Matrix Switcher WJ-SX650 Series Power Source: 220 V to 240 V AC, 50 Hz Power Consumption: 60 W Ambient Operating Temperature: –10 °C to +50 °C {14 °F to 122 °F}* Ambient Operating Humidity: Less than 90 % Video Input Board: 1 V [P-P]/75 Ω...

  • Page 97: I Card Cage Wj-Sx650U

    I Card Cage WJ-SX650U Power Source: 220 V to 240 V AC, 50 Hz Power Consumption: 60 W Ambient Operating Temperature: –10 °C to +50 °C {14 °F to 122 °F}* Ambient Operating Humidity: Less than 90 % Expansion slot: RS-485 (Camera) Port 6-conductor modular jack x 12 (2-wire or 4-wire communication, with termination switches (MODE 1 to 4))

  • Page 98: I Expansion Cable Kit Wj-Ca65L20K/Wj-Ca65L07K

    In the constant operation 4 ports available with each Video Input Board WJ-PB65C32 When this unit is powered off, this signal will not be output even with the acceptation of video input signal. Not available when the MODE switches are set as Video Output Board 2 I Expansion Cable Kit WJ-CA65L20K/WJ-CA65L07K Video cable: 37-pin D-sub x 2 (WJ-CA65L20K: 2 m {6-3/5'}, WJ-CA65L07K: 0.7 m {2-3/10'})
  • Page 99 [English] Declaration of Conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in Electrical and Electronic Equipment (adopted by Order No.1057 of Cabinet of Ministers of Ukraine) The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment (TR on RoHS).
  • Page 100 If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany © Panasonic System Networks Co., Ltd. 2011 Nd0311-0 3TR006842ADA Printed in China...

Table of Contents