Panasonic WJ-SX550B Operating Instructions Manual page 114

Preset Setting (WV-CS500 Only)
The following function is only available with the WV-CS500
camera that has preset panning functions.
Preset Menu Setting
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Preset (D3) Menu on the LCD display by
pressing the appropriate Direction buttons.
D3
Preset Menu:CS500
On
F1 F2
3. Press the Function (F1) button to select the Preset
Program Mode.
The PRESET PROGRAM Menu appears on the active
monitor.
Refer to the Preset Program Menu shown below.
Preset Menu:CS500
On
F1 F2
Preset/BLC Clear
Pre
F1 F2
Press the Function (F2) button to select the Refresh
Mode.
The Pan/Tilt/Zoom/Focus functions of the selected cam-
era are automatically activated.
.
Note: Use the refresh mode if the preset positions
become slightly different from the default positions.
116
Refresh
F3 F4
Refresh
F3 F4
BLC
F3 F4
Preset Program Menu
As shown below, the Preset Program Menu has three sub-
menus:
SET UP PRESET, SET HOME POSI (Position), and PRESET
TEST.
CAM : CameraTitle
*PRESET PROGRAM*
1 SET UP PRESET
2 SET HOME POSI
3 PRESET TEST
PRESET DATA LOADING...
The menu items explained below.
1. SET UP PRESET
Sets up the preset position or preset BLC (Backlight
Compensation) for the camera.
2. SET HOME POSI
Sets up the Home Position for the camera
3. PRESET TEST
Tests all selected preset positions.
To select an item from the Preset Program Menu:
1. Move the cursor to the desired item by moving the
Joystick Controller.
2. To execute the selection, press the CAM (SET) key.
The selected item appears on the monitor.
3. To escape from the menu without changing any set-
tings, press the MON (ESC) key.
5