Panasonic WJ-SX550B Operating Instructions Manual page 111

Camera Setup
The following function requires the use of cameras
equipped with the specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Camera Set Up (D4) Menu on the LCD dis-
play by pressing the appropriate Direction button.
D4
Camera Set Up Menu
On
F1
Note: The default setting for the Camera Setup Menu is
On. Pressing the Function (F1) button at this
moment will allow access to the Camera Set up
menu if such access is authorized by the opera-
tor's level.
If "PROHIBITED" appears on the LCD display,
press the MON (ESC) key to return the Camera Set
Up Menu display.
3. Press the Function (F1) button to gain access to the
Camera Set Up Menu.
The menu displayed may look as follows:
Camera Set Up Menu
F1 F2
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENSE UP
SYNC
WHITE BAL
WIDE D-RANGE OFF
MOTION DET
DNR
END
113
Exit
F2 F3 F4
Res A.Res Exit
F3 F4
** SET UP **
OFF
ALC
OFF
ON
OFF
INT
ATW
OFF
OFF
SET UP ENABLE
4. Select the desired item parameter by moving the
Joystick Controller UP and DOWN, and then select the
desired desired mode by moving the Joystick
Controller LEFT and RIGHT.
Press the CAM (SET) key to execute the setting or
enter sub menu, and press the MON (ESC) key to
escape from the setup mode or menu.
5. Press the Function (F2) button to reset the selected
menu, or press the Function (F3) button to reset all set-
tings to factory default setting.
Note
Refer to the Operating Instructions of the selected cam-
era for further details.
6. Press the Function (F4) button to return to the original
screen.
Caution: If camera setup is started with buttons on the
camera, all settings must be made with the buttons
on the camera's.
If camera setup is started with a Matrix Switcher, all
settings must be made with the Matrix Switcher.
5