Panasonic WJ-SX550B Operating Instructions Manual page 94

Monitor Selection
Select the desired Monitor Number (1 to 16) by pressing
the Numeric keys, then press the MON (ESC) key to exe-
cute the selection.
A1
Camera
Monitor 01
Camera
Monitor 01
Camera
Monitor 02
Notes:
• "Monitor Busy" appears on the LCD display, if the
monitor is selected by a higher priority operator.
Control of the same monitor is denied to an opera-
tor with a lower priority.
• If the CAM-P Mode is in On mode, press the
Function (F1) button instead of the MON (ESC)
key.
96
1 2 3
4 5 6
7 8 9
0
MON CAM
ESC SET
2
Camera Selection
1. Select the desired camera number by pressing the
Numeric keys, then press the CAM (SET) key.
The selected camera picture appears on the active
monitor.
A1
Camera
Monitor 02
1
4
7
MON
ESC
Camera
Monitor 02
Camera 01
Monitor 02
2. Press the INC+1CAM button to replace the currently
selected camera with the next higher camera number.
INC
+1CAM
3. Press the DEC -1CAM button to replace the currently
selected camera with the next lower camera number.
DEC
-1CAM
Notes:
• "PROHIBITED" is displayed on the LCD display, if
control of the selected camera is disabled due to
limited operator authorization.
• "Camera Busy" is displayed on the LCD display of
the camera is selected by a higher priority opera-
tor. Control of the same camera is denied to an
operator with a lower priority.
2 3
5 6
8 9
0
CAM
SET
1
5 5