Panasonic WJ-SX550B Operating Instructions Manual page 115

Setting Up Preset Positions
In the PRESET PROGRAM menu, select SET UP PRESET,
and then press the CAM (SET) key. The PRESET NUMBER
SET table shown below appears on the active monitor.
CAM
*PRESET NUMBER SET*
1#
5#
9#
13#
17
21
25
29
1. Move the cursor to the desired preset number by mov-
ing the Joystick Controller.
2. Press the CAM (SET) key. The Preset Position Setting
table shown below appears on the monitor.
CAM
POSITION NUMBER : 12
PAN/TILT/ZOOM/FOCUS
SET UP POSITION
3. Move the camera to the preset position to be registered
by moving the Joystick Controller, and adjust the zoom
and focus by pressing the ZOOM TELE/WIDE and
FOCUS NEAR/ FAR Control.
4. When satisfied with the position, press the CAM (SET)
key.
The Preset BLC (Backlight Compensation) Setting table
shown below appears on the monitor.
117
: CameraTitle
2# 3# 4#
6# 7# 8#
10# 11# 12#
14# 15#H 16#
18 19 20#
22 23 24
26 27 28
30 31 32
: CameraTitle
5. Move the cursor to the area, where backlight is bright,
by moving the Joystick Controller.
6. Press the INC + 1CAM button or DEC - 1CAM button to
toggle a mask on and off.
7. Repeat the above procedures until mask setting is
completed.
8. Press the CAM (SET) key to execute the setting.
The monitor screen returns to the previous PRESET
NUMBER SET table.
9. Repeat the above procedures to register positions for
other preset numbers.
10. Press the MON (ESC) key to return to the previous
Preset Program Menu.
5