Panasonic WJ-SX550B Operating Instructions Manual page 72

Set Up Alarm Mode 1
Note: To be able to set up this table, the Alarm Mode on the Alarm Mode Select table must be set to Off.
r
To program or edit an Alarm Mode 1, do the following:
1. Move the cursor to position 4 by moving the Joystick Controller, then press the CAM (SET) key to execute the selection.
2. Move the cursor to position 5 by moving the Joystick Controller.
Enter the desired dwell time (1-30) by pressing the Numeric keys.
3. Move the cursor to position 6 by moving the Joystick Controller, then press the Function F4 button to open the Pop Up
Window.
Move the cursor with the Joystick Controller to the desired Auto Reset time (30, 60, 90, 120, 150, 180, Off) in the Pop Up
Window, and then press the CAM (SET) key to execute the selection.
4. To select an Auto Reset time other than those displayed in the Pop Up Window in 1-second increments or decrements
between 1 to 60 seconds, leave the cursor on 30 or 60 and press the INC +1CAM or DEC –1CAM button.
....57 ← 58 ← 59 ← 60 → 90 → 120 → 150 → 180 → Off
....27 ← 28 ← 29 ← 30 → 31 → 32 → 33....
5. Press the MON (ESC) key to escape from the programming mode. The cursor returns to position 4.
73
q w e
S e t U p P R O G . A l a r m
S e t U p A l a r m M o d e 1
D w e l l 1 0 s e c
A u t o R S T 1 2 0 s e c
F 1 : - - F 2 : - -
t y
M o d e 1
F 3 : D E L F 4 : P o p U p
4