Panasonic WJ-SX550B Operating Instructions Manual page 112

Changing to Black and White Pictures
The following function is available only when specified cam-
eras with colour-black and white switching feature are
used.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the BW (C4) Menu on the LCD display by press-
ing the Direction buttons.
C4
BW
ON
F1
3. Press the Function (F1) button.
The picture will change from colour to black and white
picture on the active monitor.
4. Press the Function (F2) button.
The black and white picture changes back to colour on
the monitor.
Note: When the black and white parameter is set to
AUTO in the camera setup menu, this function is
disabled.
Camera Function (Shortcut Function)
The following function is available only when specified cam-
eras with the camera function feature is used.
This function enables executing camera functions via a
shortcut.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Camera Function (C5) Menu on the LCD dis-
play by pressing the Direction buttons.
C5
CameraFunction
CamFUNC.
F1
3. Select an assigned function number by pressing the
Numeric keys, then press the Function (F1) button.
For example, enter 175 for AGC on.
The selected function will be executed on the active
monitor.
Note: For further information, refer to the Operating
Instructions for that camera.
114
OFF
F2 F3 F4
F2 F3 F4
Auxiliary Control
The following function is available only when WV-RC100,
WV-RC150 or WV-RC170 Receivers are included in the sys-
tem.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the AUX 1 or 2 button will toggle the user's
auxiliary switch in the Receiver (WV-RC100, WV-RC150
or WV-RC170) on and off.
AUX
1 2
5