Panasonic WJ-SX550B Operating Instructions Manual page 104

9. Press the FORWARD SEQ button while the ALT indi-
cator is on to restart the sequence forward from the
beginning of the sequence step that was previously
paused by pressing the STOP button.
10. To return to Spot monitoring, select a camera.
Refer to the Camera Selection.
106
FORWARD
SEQ ALT
Group Sequence
The following functions are available only if a Group
Sequence has been previously established through the Set
Up Menu.
As described on page 67, up to 8 Group Sequences can
be set up.
1. As described earlier, the Group Sequence determines
which monitor is to be connected to which camera.
Therefore, selecting a monitor is not required.
2. Select G-seq (A2) Menu on the LCD display by press-
ing the Direction buttons.
A2
G-Seq
3. Select the desired Group Sequence number by press-
ing the Function buttons (F3/F4) or the Numeric keys.
G-Seq
F1 F2
1 2
4 5
7 8
0
MON
ESC
G-Seq
4. Press the Function (F1) button to run a Group
Sequence forward on the assigned monitors.
G-Seq
F1 F2
G-Seq 01
Monitor 16
< >
< >
F3 F4
3
6
9
CAM
SET
1
< >
1
< >
F3 F4
5