Panasonic WJ-SX550B Operating Instructions Manual page 26

WV-PB5508E Video Input Board
Appearance
q Video Output Ports (VIDEO OUT 1, 2)
The video signal connected to the Camera Input Connector (CAMERA IN) is present at these
ports.
The camera control data multiplexed on the video signal is not available at these ports. When
the power of the Matrix Switcher is turned off, no signal is present at these ports.
BNC female connectors are available for conversion by use of optional WV-CA64 loop
through cable.
9
8
7
6
w Camera Input Connector (CAMERA IN, 1 - 8)
These connectors accept either a colour or B/W composite video signal from a camera.
In addition, the VD2 signal for synchronizing the vertical timing of the cameras, and
data to control camera site devices are multiplexed through this connector.
27
VIDEO OUT
Pin No.
1 Not used
2 CH1
5
4
3 Ground (CH1)
3
4 CH2
2
5 Ground (CH2)
1
6 CH3
7 Ground (CH3)
8 CH4
9 Ground (CH4)
VIDEO OUT
1 2
Not used
CH5
Ground (CH5)
CH6
Ground (CH6)
CH7
Ground (CH7)
CH8
Ground (CH8)
INPUT
VIDEO OUT1
q
CAMERA IN
1
2
2
3
4
w
5
6
7
8
VIDEO OUT2