Yaesu WIRES-X FT3D Instruction Manual page 47

2. Touch the desired category twice.
The name of the node or room you are currently connected to is added to the list
of the registered node and room lists.
If the selected category is already registered with the same node or room, a beep
sounds and it will not register.
3. Press the [BACK] key to return to the connection screen.
 FTM-300D
1. Rotate the DIAL knob to select the node or room and then press the DIAL knob.
Displays the category list.
2. Rotate the DIAL knob to select the desired category and then press the DIAL
knob.
The name of the node or room you are currently connected to is added to the list
of the registered node and room.
If the selected category is already registered with the same node or room, a beep
sounds and it will not register.
3. Press the [BACK] key to return to the connection screen.
46
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
JA1YOE-ROOM12345
JA1YOE-ROOM12345
C1:TOKYO
C2:FISHING
C3:
C4:
C5:
2