Yaesu WIRES-X FT3D Instruction Manual page 46

⿟ Confirming the location of the other station
When latitude and longitude data is included in the signal of the other station, you may check the distance and direc-
tion of the other station in real time on the transceiver screen.
FT3D or FT2D:
FTM-300D:
FTM-400XD/D or FTM-100D:
⿟ Registering the connected node or room in the category list
 FT3D/FT2D
1. Touch the node or room you want to connect to.
Displays the category list.
2. Touch ［ADD］ .
3. Touch the desired category.
The name of the node or room you are currently connected to is added to the list
of the registered node and room lists.
If the selected category is already registered with the same node or room, a beep
sounds and it will not register.
4. Press the [BACK] key twice to return to the connection screen.
 FTM-400XD/D
1. Touch the node or room you want to connect to.
Displays the category list.
Press the [DISP] key to display the compass screen. Press the [DISP] key again to
return to the normal screen.
Press the [DISP] key on the connection screen to display the compass screen. Press
the [DISP] key again to return to the normal screen.
Press the [DISP] (SETUP) key to display the compass screen. Press the [DISP]
(SETUP) key twice to return to the normal screen.
45