Yaesu WIRES-X FT3D Instruction Manual page 29

② When connection history is stored
The ID of the previous connected the Node or Room will blink.
Press the PTT switch or touch [blinking connection ID] to connect.
If the portable node is already connected to a node or a room on the Internet
③ When connected to the same node or room as the ID of the previous connection history
The current connection ID is displayed in the lower part of the LCD. To commu-
nicate with this connection, proceed to "Communicating with other station"
(page 44).
④ When connected to a node or room different from the previous connection history
The "►" and the current connection ID is displayed in the lower part of the
LCD.
When the DIAL knob is turned, the previous connection destination ID will
blink. In this case, press the PTT switch or touch [blinking connection ID] to
connect to the previous connection ID.
While operating the Portable Node, it may be not possible to switch between "Access Point" and "Direct Operation".
Press and hold the [X] key to return to the transceiver setting screen, then press the [A/B] key.
While operating the portable node, the following functions may be set on the portable node FT3D/FT2D transceiver.
Function
Return to the transceiver setting screen
Squelch OFF
Adjusts the squelch level
Enters the BACKTRACK screen
Enters the Set mode*
Displays the frequency display screen
Displays the Function menu Screen*
Selects the Transmission Power Level
Selects Speaker Mute
Disconnects a node or a room on the Internet
* Some items in the Set mode and Function menu are automatically set for the Portable Digital Node function, so the
settings cannot be used
Key or Dial
Press and hold the X key
While MONI key is pressed
FT3D: Press the SQL key, then rotate the VOL knob
FT2D: Press the SQL key, then rotate the DIAL knob
Press the DISP key
Press and hold the DISP key
Press the V/M key
Press the V/M key and then touch [F MW] on the LCD screen
Touch [TX PWR] in the Function Menu Screen
Touch the A/B key
Press and hold the BAND key
28