Yaesu WIRES-X FT3D Instruction Manual page 38

3. Touch the node or room you want to connect to start a connection.
• Once connection is successfully established, "Connected" will appear on the LCD.
• If connection is unsuccessful, an error message appears and the screen
returns to the list of nodes and rooms.
④ Connecting to the node or room you have most recently connected
1. If you have previously connected to a node ID or a room ID on the Internet, it
appears and flashes at the bottom of the screen.
• Touch the flashing node ID or room ID to start connection, and once connection is
established, the menu list of the node (room) you are connected to will appear.
• If connection is unsuccessful, an error message appears and the name
flashes again.
⑤ Entering the DTMF ID number (5 digits) of the node or the room
1. Touch [SEARCH & DIRECT].
Displays the category list.
2. Touch [SEARCH & DIRECT].
Displays the character input screen.
3. Touch [ID].
Displays the DTMF ID input screen.
4. Enter the 5-digit DTMF ID.
5. Touch [ENT] to start a connection.
• Once connection is successfully established, "Connected" will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen re-
turns to the DTMF ID input screen.
37