Yaesu WIRES-X FT3D Instruction Manual page 42

② Searching by node or room ID
1. When the local node is displayed in the upper row, rotate the DIAL knob to se-
lect [SEARCH & DIRECT] and press the DIAL knob.
Displays the category list.
2. Rotate the DIAL knob to select [SEARCH & DIRECT], then press the DIAL
knob.
Displays the character input screen.
3. Enter all or part of the Room ID or the Node ID, then press the DIAL knob.
The list is searched for the matching foreword part of the ID.
If connection destinations with the foreword of the ID matching the entered ID
are found, they will be listed.
• The number of matches with the searched character string is displayed as
"JA1Y" → 24.
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
• If there is no connection destination matching the entered name, "No Match-
es" appears and then the screen returns to the character input screen.
• If the entered ID is found, the transceiver establishes connection immediately.
5. Rotate the DIAL knob to select a node or room and press the DIAL knob to start
connection.
• Once connection is successfully established, "Connected" will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen re-
turns to the list of nodes and rooms.
③ Connecting to registered nodes or rooms to the category list
1. When the local node is displayed in the upper row, rotate the DIAL knob to se-
lect [SEARCH & DIRECT] and press the DIAL knob.
Displays the category list.
41
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
CATEGORY
ALL
SEARCH & DIRECT
C1:
C2:
C3:
C4:
"JA1Y" 24
JA1YOE-TKY-ROOM 42
JA1YOE-ROOM-A 31
JA1YOE-ROOM-B 16
JA1YOE-ROOM-C
JA1YOE-ND1
JA1YOE-TKY
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
1