Yaesu WIRES-X FT3D Instruction Manual page 27

 FTM-400XD/D
1. Press and hold the [GM] key.
The DG-ID SETUP screen is displayed on the LCD.
2. Touch [DG-ID TX].
The numbers of the set value will turn orange in color.
3. Rotate the Band A DIAL knob (upper side) to set the transmit DG-ID.
When setting the DG-ID number, pressing and holding the [DISP] (SETUP) key
will set the transmit and the receive DG-ID numbers to "00".
4. Touch [BACK] , then touch the screen to select "DG-ID RX".
"DG-ID RX" will turn orange.
5. Touch [DG-ID RX].
The numbers of the set value will turn orange in color.
6. Rotate the Band A DIAL knob (upper side) to set the receive DG-ID.
7. Press and hold the [GM] key to save the setting and return to normal
operation.
The setting of the FTM-400XD/D transceiver is complete.
 FTM-300D
1. Press and hold the [GM] key.
The DG-ID number setting screen is displayed.
2. Press the DIAL knob, then rotate the DIAL knob to set the transmit DG-ID (DG-ID
TX).
When setting the DG-ID number, pressing and holding the DIAL knob will set
the transmit and the receive DG-ID numbers to "00".
3. Press the DIAL knob, then rotate the DIAL knob to set the "DG-ID RX".
26
DG-ID SETUP
DG-ID TX 00 DG-ID RX 00
BACK
BACK
DG-ID SETUP
DG-ID TX 50 DG-ID RX 00
BACK BACK
DG-ID SETUP
DG-ID TX 50 DG-ID RX 00
BACK
BACK
DG-ID SETUP
DG-ID TX 50 DG-ID RX 50
BACK BACK
DG-ID SETUP
DG-ID TX
DG-ID RX
DG-ID SETUP
DG-ID TX
DG-ID RX
DG-ID SETUP
DG-ID TX
DG-ID RX