Direct IP IDIS DC-D1011 Installation Manual page 31

Power Input
iv
Power Consumption
Certifications
iv
This product is intended to be supplied by a Listed Power Supply Unit marked "Class2" and rated from 12 VDC, min. 3A.
iv
Overvoltage Category I, Pollution Degree 2
v
Applies to DC-D1223R model only.
v
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. This
equipment is indoor use and all the communication wiring are limited to inside of the building.
vi
Applies to DC-D1022W / DC-D1022WR / DC-D1122W / DC-D1122WR / DC-D1123W / DC-D1123WR / DC-D1123WHR / DC-D1223W /
DC-D1223WR / DC-D1223WHR / DC-D1323WR / DC-D1323WHR
V1.2
/ DC-D1011 / DC-D1022W / DC-D1022WR /
TYPE 1
DC-D1111 / DC-D1122 / DC-D1122R / DC-D1122V
/ DC-D1122VR / DC-D1122W / DC-D1122WR
DC-D1212 / DC-D1212R
/
TYPE 1 TYPE 2
models only.
Part 3- Appendix
12V DC,
PoE(IEEE 802.3af, Class2)
PoE(IEEE 802.3af, Class 2)
Max. 4.8W
DC-D1123WHR / DC-D1223WHR
(
/ DC-D1323WHR
- With heater on:
Max. 19.2W)
FCC, CE, UL v , IP66 vi
31