Direct IP IDIS DC-D1011 Installation Manual page 17

• Check your local laws and regulations on making
video or audio recordings. The user will be held
liable for any violation of the law. (Article 25-5 of
the Personal Information Protection Act: Operators
of image data processing devices may not operate
such devices for purposes other than as originally
intended during device installation, place such
devices at locations other than as originally
intended, or use such devices to record audio.)
• When switching over from 12 VDC to PoE as the
power source, the system will be rebooted once the
power adapter is disconnected.
• Ground the power port's frame ground terminal
before use.
• Organize the power cable so that it will not cause
people to trip over or become damaged from chairs,
cabinets, desks, and other objects in the vicinity. Do
not run the power cable underneath carpet or a rug
or plug the cable into a power outlet shared by a
number of other devices.
• Wrap the camera-end of the network cable twice
around the provided ferrite core (28A2024-0A2,
Laird Technologies) to subdue electromagnetic
wave generation.
Ferrite Core
LAN Cable
• The network connector is not designed to be
connected directly with cable or wire intended for
outdoor use.
LED Status Indications
LED Status
Off
Power LED
Flashing
On
Network LED On
Power LED/ Flashing
Network LED (sequentially)
Connector Arrangement
TYPE 1
TYPE 2
Part 1 – Introduction
Description
Power not
connected
Booting
Powered on
Not connected to
network
Software upgrade
in progress
17