Multiple Energetics (Master/Slave Control) - SHOWTEC Energetic V3 Manual

Energetic

Multiple Energetics (Master/Slave control)

01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-p XLR cable to connect the Energetics and other devices.
The pins:
04) Link the units as shown in Fig. 06, connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units. You can use the
same functions on the master device as described on pages 18 and 19 (Built-in programs, Static
Color, Manual). This means you can set your desired operation mode on the master device and all
slave devices will react the same as the master device.
Multiple Energetics (Master/Slave control)
Ordercode: 43165
1. Earth
2. Signal (-)
3. Signal (+)
Note: Link all cables before connecting electric power
13
Fig. 06