System Settings - SHOWTEC Energetic V3 Manual

Energetic

6. System Settings

With this menu you can set several system functions.
01) Press the Menu button until the display shows
02) Press the Enter button to open this menu.
03) Press the Up and Down buttons to choose between 3 settings:
04) Press the Enter button to open this menu.
LED power saving mode
Test mode
Reset to default settings
05) If you have chosen
06) Press the Up and Down buttons to choose between
07) If you have chosen
08) All 4 LEDs on the back light up and the device will start with a full test of all the features available on
the device.
09) If you have chosen
10) The display will show its version
11) The device will start up in the Auto Run Programs mode.
Ordercode: 43165
, press the Enter button to activate the LED power saving mode.
, press the Enter button to activate the test mode.
, press the Enter button to reset to default settings.
and the device settings have been reset.
19
.
.