Rigging; Connection With The Mains - SHOWTEC Energetic V3 Manual

Energetic

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
● If the Energetic is lowered from the ceiling or high joists, professional trussing systems have to be used.
● Use a clamp to mount the Energetic, with the mounting bracket, to the trussing system.
● The Energetic must never be fixed swinging freely in the room.
● The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
● When rigging, derigging or servicing the Energetic, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
The Energetic can be placed on a flat stage floor or mounted to any kind of truss with a clamp.
Improper installation can cause serious injuries and/or damage of property!

Connection with the mains

Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
L
N
YELLOW/GREEN
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!
Ordercode: 43165
EU Cable UK Cable
BROWN
BLUE BLACK
GREEN
US Cable
RED YELLOW/COPPER
SILVER
GREEN
7
Pin
PHASE
NEUTRAL
PROTECTIVE
GROUND