Decommissioning; Vii.1 Decommissioning; Vii.2 Disassembly; Vii.3 Protecting The Environment - Galvamet Perfecto Instructions For Installation, Use And Maintenance Manual

Table of Contents

Advertisement

EN
VII

DECOMMISSIONING

VII.1 DECOMMISSIONING

Decommissioning means the definitive shutdown and dismantling of the appliance.
After decommissioning, the appliance can be incorporated into another unit, resold privately or
disposed of.
Attention! To put it out of service, it is necessary to switch off the appliance and
disconnect the power supply from the appliance (Fig. 2.1-2.2 WARNINGS chapter).
Attention! Only have the electrical lines disconnected and closed by specialist
personnel.

VII.2 DISASSEMBLY

Disassembly requires that the device is accessible for disassembly and has been disconnected from
the voltage supply.
To do this, proceed as follows:
Loosen the screws and fixing brackets
Remove any silicone sealants
Pull the hob out from above

VII.3 PROTECTING THE ENVIRONMENT

The packaging materials are environmentally-friendly and recyclable.
The electronic devices consist of materials that are recyclable but sometimes harmful for the
environment, but necessary for the correct functioning and safety of the appliance.

VII.4 DISPOSAL

This appliance is marked in accordance with the European Directive 2012/19/EC,
Waste Electrical and Electronic Equipment (WEEE).
The symbol on the product or on the packaging indicates that the product must
not be treated as normal household waste, but must be taken to the appropriate
collection point for the recycling of electrical and electronic equipment.
By ensuring that this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and for human health. For
detailed information about recycling this product, contact your council, your local
waste collection service or the store where you purchased the product.
50 

Advertisement

Table of Contents
loading

Related Products for Galvamet Perfecto

Table of Contents