Table of Contents
Advertisement
EN
IV.3.b HOB CHARACTERISTICS
Permanent Pot Detection:
The hob is only activated in the presence of pots on the cooking zones. Heating does not start, or
stops, if pots are absent or removed.
Pot Detector:
The hob automatically detects the presence of pots on the cooking zones.
Safety Shutdown:
For safety reasons, each cooking zone has a maximum operating time which depends on the power
level set.
Residual Heat Indicator:
When one or more cooking zones shut down, the presence of residual heat is indicated by a visual
signal on the corresponding zone display, by way of the "H" symbol.
Acoustic feedback (Beep)
Function activation acoustic signal
IV.3.c HOB CONFIGURATION
Before use, the Touch Control Panel of the hob, it must be set up to suit your personal requirements.
When the hob is powered, the symbol
access the user menu. Wait for it to switch off and for all the functions to be active according to the
factory settings.
USER MENU
From the user menu it is possible to modify certain functions of the control panel such as the
brightness, the volume of the sound of the keys, the volume of the information sounds, the lighting
of the control panel, the animation of the timer, etc.
To access the User Menu, the control panel (hob control display) must be in standby mode (off).
User Menu Access:
-> Touch ON/OFF to turn on the Control Panel, then touch ON/OFF again within 3 seconds to turn
off.
-> The || key (Pause) starts pulsing for a maximum of 60 seconds (if no action is taken, the attempt
to enter the menu is automatically exited after these 60 seconds).
-> Press the || key (pause) without releasing it.
-> Press the display of each cooking zone clockwise as shown in Fig. 4.3.c.1, again without releasing
the Pause key, starting from the display of the left front cooking zone 2FL (1-2-3-4).
will flash for 2 minutes to indicate that it is possible to
28
Advertisement
Table of Contents
