Table of Contents
Advertisement
EN
Cooking zone timer
On each cooking zone, even simultaneously, it is possible to set the Cooking Zone Timer function
which is a countdown.
At the end of which the cooking zones switch off automatically, emitting an acoustic signal (beep).
To activate the function:
-> touch the Selection/Display area (2) with a power level other than 0
-> touch the key
(3) relating to the cooking zone
-> the display shows "---" and the Timer can be set.
-> set the duration of the timer, with the + / - keys (6), which is displayed in the Display area (5)
During programming the symbol
(3) flashes.
The cooking zone timer starts 10 seconds after activation (without pressing any other key).
To reset the timer with cooking, press and hold the key
(3) again
If desired, the Timer programming can be repeated for several cooking zones.
Each cooking zone can have a different Timer set and the display (5) will show the countdown of the
cooking zone selected at that moment.
If no zone is selected, pressing on the Display (5) the countdown of the Autonomous Timer is
displayed.
The countdown display is the same as for the Autonomous Timer (see previous paragraph)
At the end of the countdown, an acoustic signal (beep) will be emitted and the cooking zone will
switch off.
To stop the beep, press ON, or
To deactivate the Timer:
-> select the cooking zone (2) and set the duration of the Timer to
with the + / - keys (6)
Bridge Function
This function allows both cooking zones to work at the same time forming a single cooking zone with
the same power level.
This function allows homogeneous cooking with large pots.
The front "Primary" cooking zone can be used in combination with the corresponding "Secondary" one
at the back.
The function is provided on all cooking zones:
2FL (primary) + 2RL (secondary)
2FR (primary) + 2RR (secondary)
37
Advertisement
Table of Contents
