Table of Contents
Advertisement
EN
The unit cladding must be treated with heat-resistant glues (100°C) otherwise, due to lower thermal
resistance, its shape and colour could change.
Ideally the appliance must be installed without tall units or walls on both sides (Fig.3.2.4-A). The
presence of tall units or walls is only permitted on one side of the appliance (Fig.3.2.4-B and
Fig.3.2.4-C). It is absolutely forbidden to place units or walls higher than the appliance on both
sides (Fig.3.2.4-D), for protection against the danger of fire. The use of wooden decorative slats
is not permitted.
We recommend installing the appliance only after having assembled the wall unit to avoid any
damage to the glass top.
The safety space between the hob and any unit positioned above it must respect a minimum
distance of 500 mm. (Fig. 3.2.4-A).
Fig. 3.2.4
11
Advertisement
Table of Contents
