Table of Contents
Advertisement
EN
II
WARNINGS
The appliance is manufactured according to the safety standards in force.
Use of the appliance cannot be different from that for which it was built, i.e. as an extractor
induction hob, for the cooking of food and the extraction of cooking fumes, installed in domestic
kitchens.
The manufacturer disclaims all liability for any damage caused to persons, animals or property,
installation and maintenance errors, or misuse.
Before connecting the appliance to the mains, check the serial number plate (located on the
lower part of the appliance) to make sure that the voltage and power correspond to those of the
mains and that the connection socket is suitable. If in doubt, contact a qualified electrician.
Attention! Before any cleaning or maintenance operation or in the event of
thunderstorms, disconnect the appliance by setting the main system switch to "off"
(Fig.2.1) or by unplugging it (Fig.2.2).
Fig. 2.1
When the extractor hob is in operation, the parts of the extractor hob adjacent to the induction
hobs can also become hot.
There is a possibility of fire if cleaning operations are not carried out according to the
instructions.
The appliance must not be cleaned with steam or high-pressure cleaners.
It is forbidden to introduce any object through the glass extraction flap (Fig.2.3).
Fig. 2.3
Fig. 2.2
5
Advertisement
Table of Contents
