Table of Contents
Advertisement
EN
Exiting from the User Menu:
-> Exit without saving: Touch the || key (Pause).
All changes are discarded and the || key stops flashing.
-> Exit with Save settings: Touch the power ON/OFF key for 2 seconds.
The changes are saved and the || key stops flashing.
Note: The user menu exits automatically if no operation is performed for 1 minute.
Overview of the user menu items
The following table (Fig. 4.3.c.2) provides an overview of the user menu items:
Fig. 4.3.c.2
Display
Meaning
Rear
Left
(2RL)
U0
Power regulation
range
U1
Filter Setting:
Grease filter or Odour
filter with or without
5-minute Fan after-
run (Fan after-run
it is an extraction
function at level 1
after the hob has been
switched off cooking is
completed)
U2
Volume for button
tones
Display
Note
Front
Left
(2FL)
Adjustable
Maximum configured power
from >1.4kW
by default: Value 0 -> 7.4 kW
upwards
(Value X->X.X kW if otherwise configured during
with 0.1 kW
installation via Service Menu)
step
1st step, select timer central display (5)
where the set power value is lit up (for
example 7.4);
2nd step, scroll with the slider (4):
-> from left to right to raise the value
-> from right to left to lower the value
0,1,2,3
Default Filter setting -> 0
0: Grease filter
1: Grease filter and odour filter
2: Grease filter
3: Grease filter and odour filter
0,1,2,3
Volume adjustment for button tones:
0: No button tone
1: minimum volume
2: half volume
3: maximum volume
Notes:
• For regulatory reasons, the button tones
for power on and off cannot be disabled.
They will sound at the last volume level that
was set before disabling the button tones.
• Error tones are always played at maximum
volume (setting 3) and cannot be disabled.
30
with Fan after-run 5 minutes
with Fan after-run 5 minutes
without Fan after-run
without Fan after-run
Advertisement
Table of Contents
