Table of Contents
Advertisement
EN
2. Manual mode 2
-> Both the suction level and the timer are set and the hob is switched off via the ON/OFF button
-> Level 1 of the "After-run" function is set and remains active for the time set in the timer.
-> At the end of the time set in the timer, the hob switches off completely.
3. Automatic mode
-> The timer can be set as soon as the extraction is running and starts working as soon as all the
cooking zones are switched off.
-> There is no timer warning after the after-run function expires
Filter cleaning alert
This function is programmed to alert to the fact that maintenance is due:
Grease filters: every 30 hours
Long life ceramic odour filters: every 120 hours (deactivated by default)
If the anti-odour warning is activated, it will be signalled even if the appliance is not installed in
filtering mode: in this case proceed with normal cleaning of the grease filters and reset the warning.
Activation / Deactivation:
-> Access the User Menu (see HOB CONFIGURATION paragraph) and set it according to your
requirements by following the instructions in the items Overview table (Fig.4.3.c.2) to the code "U1".
Filter cleaning indicator reset:
If the grease filter timer expires, the symbol
for 5 seconds to reset the filter timer, a
again.
If the odour filter timer expires, the symbol
reset the filter timer, a
If both filter timers have expired, the symbol
be pressed for 5 seconds; a
on flashing. It must be pressed for 5 seconds to reset the odour filter timer, a
display (12) and the warning count starts again.
appears on the display (12) and the warning count starts
appears on the display (12) and the warning count starts again.
will appear on the display (12). After that, the symbol
(13) comes on with a fixed light. It must be pressed
(13) will flash. It must be pressed for 5 seconds to
(13) lights up steadily. The grease filter timer must
42
(13) comes
appears on the
Advertisement
Table of Contents
