Iv.3 Induction Hob; Iv.3.A Cooking Zone Display - Galvamet Perfecto Instructions For Installation, Use And Maintenance Manual

EN

IV.3 INDUCTION HOB

Important:
All functions of this hob are designed to comply with the most stringent safety regulations.
For this reason:
• Some functions are not activated, or are deactivated automatically, if there are no pans on the
burners or when they are incorrectly positioned.
• In other cases the activated functions will be automatically deactivated after a few seconds, if the
specific function requires a further setting that has not been selected (e.g.: "Turn the hob on"
without "Selecting the cooking zone" and the "Operating temperature", or the "Lock Function" or
the "Timer" function).
Attention! In the case (for example) of prolonged use, the cooking zone may not immediately shut
down because it is in the cooling phase; the "H" symbol will appear on the cooking zone display, to
indicate the execution of this phase.
Wait for the display to switch off before approaching the cooking zone.

IV.3.a COOKING ZONE DISPLAY

The following is shown on the cooking zone displays:
Cooking zone on
Power level
Residual heat display
Pot Detection
Bridge function active
Warming function active
Pause function
Chef Cook Function
(P=Power Booster)
27