Galvamet Perfecto Instructions For Installation, Use And Maintenance Manual page 44

EN
Ordinary cleaning
Do not let dirt accumulate on the external and internal surfaces of the appliance.
For the central glass flap, follow the same instructions indicated for cleaning the induction hob.
Attention: the flap cannot be washed in the dishwasher.
Routine cleaning must be carried out before an excessive accumulation of dirt is created which can
cause abrasive phenomena.
Before carrying out the washing operations, it is necessary to remove any dust particles by blowing
or suctioning them, in order to avoid rubbing on the surface.
Where water has been used as a means of cleaning or rinsing, especially in areas with a significant
presence of limescale, it is advisable to dry the surface to prevent the appearance of stains.
To avoid contamination caused by iron particles, make sure that the tools chosen for cleaning have
not been used previously on other metals or alloys.
Materials for cleaning stainless steel products must be exclusively reserved for this purpose.
Particular care must be paid to the grease filter, which has the function of retaining the grease
particles contained in the vapours, and to the tray below, which has the function of collecting the
grease that could drip from the grease filter. Collect the condensation or collect the liquids
accidentally poured into it through the glass flap.
Both of these elements must be washed when the relevant warning appears or at least once a month
in hot water and detergent (even in the dishwasher).
The filter may become discoloured after a few washes. This is normal and does not mean it has lost
its effectiveness.
To perform maintenance on the metal grease filter and on the tray underneath, it is essential to
remove them from the appliance.
To remove the metal grease filter and the tray, proceed as shown in Fig. 5.1.1:
-> Push down the right side of the central glass flap
-> Remove the central glass flap (1)
-> Grip the metal grease filters by the knob and remove them (2)
-> Remove the condensate collection tray (3)
44