Ultrastar Data60 Unpacking Procedure - Western Digital Ultrastar Data60 Installation Manual

Installation Guide
4.2 Ultrastar Data60 Unpacking Procedure
Make sure that all of the necessary parts and equipment are available, including any equipment
Step 1 :
necessary to support the enclosure during installation. To verify the list of necessary parts, see
Ultrastar Data60 Packaging Overview (page 21)
Step 2 : Using a box cutter, cut the straps that secure the packaging to the pallet.
Remove and discard the top cap.
Step 3 :
Figure 10: Top Cap and Sleeve Removal

4.2 Ultrastar Data60 Unpacking Procedure

.
4. Packaging
24