Installation Guide
Open the drive boxes and verify their contents. Depending on the version of the Ultrastar Data60
Step 7 :
being unpacked, the boxes should contain twenty drive assemblies each (in the form of HDDs,
SSDs, or blanks). Once the contents are verified, leave them in the boxes. This will protect them
from damage until they are installed in the enclosure.
Figure 13: Verify Drives and Drive Blanks
The chassis weight without drives is 20 kg / 44 lbs . To avoid injury, the
Warning:
chassis should be team lifted.
Caution:
Do not lift the chassis by the system handles. The handles are designed
only for sliding the enclosure out of the rack on its rails.
4.2 Ultrastar Data60 Unpacking Procedure
4. Packaging
26