Table of Contents
Advertisement
6.12
CLEANING THE FUEL-BED / GLASS PANEL
We do not recommend cleaning of the coals or fuelbed components as these are
fragile and damage may result. None of these parts must be washed or
exposed to any cleaning agents or water. Any damaged parts must be
replaced by contacting your dealer or telephoning BFM Europe Ltd. on the number
stated on the rear cover of this book. The coals must only be replaced with a
complete and genuine replacement set and the fire must never be run with the
wrong number or damaged coals or pebbles. The fuel-bed must be carefully re-
assembled as stated in section 6.9/6.10, pages 75-83.
To clean the glass panel, please remove it from the product as described overpage
Use a clean damp cloth and ceramic glass cleaner to remove any stains or
deposits frm the glass panel. Do not using scouring pads as this may scratch the
surface finish of the glass panel.
PLEASE NOTE :- The glass will require cleaning periodically. Condensation
produced by the products of combustion will create marks on the inside face of the
glass panel.
85
Hide quick links:
Advertisement
Table of Contents
