Cleaning The Fire; Cleaning The Fuel-Bed / Glass Panel - Flavel Kenilworth HE Installation, Maintenance & User Instructions

Warning : Use only the pebbles supplied with the fire. When replacing the
pebbles remove the old pebbles and discard them. Fit a complete
set of pebbles of the correct type. Do not fit additional pebbles or
any pebbles other than a genuine replacement set.
To ensure that the release of fibres from these R.C.F (Refractory Ceramic
Fibre) articles is kept to a minimum, during installation and servicing we
recommend that you use a HEPA filtered vacuum to remove any dust
accumulated in and around the appliance before and after working on the
appliance. When replacing these articles we recommend that the replaced
items are not broken up, but are sealed within heavy duty polythene bags,
clearly labelled as "RCF waste". RCF waste is classed as a "stable", non
reactive hazardous waste and may be disposed of at a landfill licensed to
accept such waste Protective clothing is not required when handling these
articles, but we recommend you follow the normal hygiene rules of not
smoking, eating or drinking in the work area, and always wash your hands
before eating or drinking.
h.) Replace the glass panel and retaining trims as described on
pages 10 & 11
NEVER USE THE FIRE WITHOUT THE GLASS PANEL IN POSITION, OR IF
BROKEN OR CRACKED.
6.5 CLEANING THE FIRE - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool. Consult your retailer to determine what trim / fret / fascia option was
supplied with your fire. If a real Brass fret was supplied with the fire it will
therefore will discolour with use and should be cleaned with a proprietory metal
polish. A laquered brass fret should not discolour and should only be cleaned with
a clean, damp cloth. The chrome, black & brass effect trims and chrome effect fret
that are supplied with the fire (dependent upon model chosen) should only also
be cleaned with a clean, damp cloth.
The trim is best cleaned in position on the fire when the appliance is not running
and is cool. Black painted metal parts should be gently cleaned with a damp cloth.
6.6

CLEANING THE FUEL-BED / GLASS PANEL

We do not recommend cleaning of the coals / pebbles or fuelbed components as
these are fragile and damage may result. None of these parts must be washed
or exposed to any cleaning agents or water. Any damaged parts must be
replaced by contacting your dealer or telephoning BFM Europe Ltd. on the number
stated on the rear cover of this book. The coals / pebbles must only be replaced
with a complete and genuine replacement set and the fire must never be run with
the wrong number or damaged coals / pebbles. The fuel-bed must be carefully re-
assembled as stated in section 6.3 / 6.4
61