For all Manual Control models proceed as follows :-
2.2.5
Remove the two off screws from the left and right hand burner
mounting brackets, plus the two screws from the base of the control
panel as shown below in figure 10, this will allow removal of the
complete burner unit from the firebox.
Fig. 10
For all Remote Control models proceed as follows :-
2.2.6
Remove the two off screws from the left and right hand burner
mounting brackets, plus the two screws from the base of the control
panel as shown below in figure 11, this will allow removal of the
complete burner unit from the firebox.
Fig. 11
4 off burner
retaining screws
4 off burner
retaining screws
13
Need help?
Do you have a question about the Linear HE and is the answer not in the manual?