Loading/Transporting The Machine - Fayat Group BOMAG BM 500/15 Service Manual

Cold planer
Hide thumbs Also See for BOMAG BM 500/15:
Table of Contents

Advertisement

Safety regulations and environmental protection regulations when handling lubrication
1.2.4.7
grease
Fig. 6

1.2.5 Loading/transporting the machine

CAUTION!
Health hazard caused by contact with lubrica-
tion grease!
B-SYM-0210
CAUTION!
Danger of slipping on lubrication grease!
ENVIRONMENT!
Lubrication grease is an environmentally haz-
ardous substance!
Transport the machine only with the wheel folded out, danger of
tipping over!
Use only stable loading ramps of sufficient load bearing capacity.
The ramp inclination must be less than the gradability of the
machine.
Loading ramps and transport vehicle must be free of grease, oil,
snow and ice.
For a 3-wheel machine use an additional middle loading ramp.
Make sure that persons are not endangered by the machine tipping
or sliding off. The instructing person must stand within the view of
the operator, but outside the danger area.
Do not use damaged or in any other way impaired lashing points.
Always use appropriate lifting and lashing means on the lifting and
lashing points.
Use lifting and lashing gear only in the prescribed direction of load
application.
BM 500/15
General – Concerning your safety
Wear your personal protective equipment (pro-
tective gloves, safety goggles, protective
clothing).
Avoid contact.
Collect and remove excess lubrication grease
immediately.
Always keep lubrication grease in proper con-
tainers.
Collect excess lubrication grease and dispose
of it according to regulations.
Dispose of cloths soiled with lubrication grease
according to regulations.
23

Advertisement

Table of Contents
loading

Table of Contents