Safety Instructions; Esd Protective Measures - Primedic RECK MOTOmed loop Service Manual

Safety Instructions


Service and maintenance work may only be completed by a trained professional.

Disconnect the power cord from the wall outlet before beginning any work on the unit.

Do not operate the device with the side panels removed.

Folgen Sie den Anweisungen in diesem Service-Handbuch.

Ensure all screws have been tightened prior to operating the device.

Follow all safety instruction in this service manual.
ESD- Protective Measures
Electrostatic discharges can damage electronic components.
Discharges with a potential of 10,000 volts are not uncommon. Electrical components are often damaged
prior to receiving damage from a ESD. In severe cases the damage is not detected until a later date.
When contacting electronic components it is required to wear a wrist-linked grounding band that is
connected to a charge potential equalization device.
Seite 4